Shop
Argoshield Light G Size Swap Sydney Melbourne Brisbane
Product Introduction
Argoshield Light G Size Cylinder Swap/Exchange for MIG welding mild steel, available in Sydney, Melbourne, Brisbane only. Features no rental fees, refillable bottle, Australian WorkSafe approved, includes full gas delivery to selected locations.Product Parameters
| Gas Composition | 5% CO?, 2% O?, Balance Ar |
| Volume | 10.5m3 |
| Dimensions | 163cm (H) x 25cm (D) |
| Weight | 80kg |
| Welding Time | Approx 18 Hours |
Argoshield Universal E Size Gas Cylinder
Argoshield Universal E Size Swap/Exchange Sydney-Melbourne-Brisbane
Product Introduction
Argoshield Universal E Size Cylinder Swap/Exchange for Sydney, Melbourne, Brisbane only. Pay no rental fees, get a full, refillable cylinder with approx 10 hours welding time. Australian WorkSafe approved, delivered to selected locations.Key Specifications
| Volume | 4.4m3 |
| Dimensions | 90cm (H) x 20cm (D) |
| Weight | 36kg |
| Gas Mix | 16% CO?, 3% O?, balance Ar |
| Working Pressure | 200 Bar |
Argoshield Universal G Size Cylinder with Gas
Product Description
Argoshield Universal G Size Cylinder with gas, no rental fees, refillable, WorkSafe approved. Ideal for MIG welding mild steel, delivering approx 18 hours welding time. Available in Sydney, Melbourne, Brisbane only.
Specifications
| Volume | 10.5m3 |
| Dimensions | 163cm (H) x 25cm (D) |
| Weight | 80kg |
| Gas Mix | 16% CO?, 3% O?, balance Ar |
| Working Pressure | 200 Bar |
Argoshield Universal G Size Swap/Exchange
Product Introduction
Argoshield Universal G Size Cylinder Swap/Exchange for MIG welding mild steel, featuring 16% CO?, 3% O?, balance Ar gas mix. Pay no rental fees, delivered within Sydney, Melbourne, Brisbane. Approved by Australian WorkSafe.Product Parameters
| Volume | 10.5m3 |
| Dimensions | 163cm (H) x 25cm (D) |
| Weight | 80kg |
| Welding Time | Approx 18 Hours |
| Valve Type | Type 10 |
Arora AC Magnetic Yoke Combo Kit – High Quality Welding Tool
Product Introduction
The Arora AC Magnetic Yoke Combo Kit is a comprehensive solution for magnetic particle inspection, combining a high-powered AC magnetic yoke with essential MPI materials. It ensures precise detection of surface-breaking indications, suitable for dry/wet and color contrast/fluorescent methods.Key Specifications
| Lifting Force | 4.5kg / 10Lb |
| Input Voltage | 230V 50Hz Single Phase |
| Leg Spacing | 65-260mm (Adjustable) |
| Duty Cycle | 50% (Max 60s on/off) |
| Warranty | 12 Months |
Arora AY-7A AC Magnetic Yoke NDT MPI Test Tool
Product Introduction
Arora AC Magnetic Yoke AY-7A is a robust NDT magnetic particle MPI test tool with durable construction and ergonomic design, suitable for dry/wet, color contrast/fluorescent methods.
Key Specifications
| Input Voltage | 230V 50Hz Single Phase |
| Lifting Force | 4.5kg / 10Lb |
| Leg Spacing | 65-260mm (Adjustable) |
| Field Strength | 2Ka/m RMS at center |
| Duty Cycle | 50% (60s on/off max) |
AT1000 Compressed Air Filter Cartridge 6-Pack for Plasma Cutter
Product Introduction
Designed for plasma cutters and sand blasters, this 6-pack AT1000 compressed air filter removes sub-micro contaminants, moisture, and oil aerosols. Ensures clean, dry air to protect equipment, ideal for painters and pneumatic tools. Made in Italy with high-quality materials.Key Specifications
| Filtration | 0.01 micron |
| Max Flow | 1250 liters/min |
| Max Pressure | 125psi (8.5 bar) |
| Thread | 1/4" NPT |
| Pack Includes | 6 cartridges, brackets, hardware |
AT1000 Compressed Air Line Filter for Plasma Cutter-Sand Blaster-Spray Paint
Product Introduction
AT1000 compressed air line filter removes moisture, oil aerosol and 0.01¦Ìm contaminants for plasma cutters, sand blasters and spray painting. Ensures clean air supply to prevent torch damage, with high flow rate and easy installation.
Specifications
| Filtration | 0.01 micron |
| Max Flow | 1250 l/min |
| Max Pressure | 125psi (8.5 bar) |
| Thread | 1/4" NPT |
| Dimensions | 132mm x 200mm |
AT1000 Compressed Air Line Filter Replacement
Product Introduction
The AT1000 is a sub-microbic compressed air filter designed to reduce the smallest air contaminants, condensed moisture and oil aerosol for plasma cutters. It ensures clean, oil-free and dry compressed air to maintain machine performance, suitable for all plasma cutters.
Product Parameters
| Origin | Made in Italy |
| Package | 1 x Filters value pack |
| Length | 177mm |
| Width | 107mm |
| Inner Diameter | 37mm |
Bakers 250ml Soldering Fluid Flux High Quality Sealant
Product Introduction
Bakers Soldering Fluid Flux is a tried and true general-purpose soldering flux, ideal for copper, brass, tin plate, tinned metal, clean steel sheet, and electrical work, compatible with various solder alloys and base metals.
Product Specifications
| Capacity | 250ml |
| Application | Copper, brass, tin plate, tinned metal, clean steel sheet, electrical work |
| Compatibility | Range of solder alloys and base metals |
| Type | General purpose soldering flux |
Balloon Filler Helium Regulator High Efficiency Fast Fill
Product Introduction
Quality balloon filler regulator for parties or promotional events, featuring a piston design with endurable tilt valve for quick inflation. Simply attach to gas bottle, slide balloon over nozzle and tilt to fill.Product Parameters
| Model No | MG310 |
| Design | Piston with tilt valve |
| Installation | Hand or Wrench tight |
| Certification | ISO 9001, ISO13485 |
| Thread Type | Standard Australian Type 10 |