SC80 PT80 45Amp 0.9mm Plasma Cutter Drag Cutting Tip 5pcs
$24.90
Product Introduction
A high-quality drag cutting tip for plasma cutters, featuring a copper screen to prevent double arcing, allowing direct torch dragging on workpieces without adhesion. Ideal for thin metals and sheet metal cutting with precise speed and pattern control. Made in Italy to OEM standards.
Product Parameters
| Quantity | 5 Each |
| Tip Diameter | 0.9mm |
| Length | 21mm |
| Width | 11mm |
| Inner Diameter | 11mm |
SC80 PT80 45Amp Plasma Cutter Drag Cutting Tip 0.9mm – 5 Each
Upgrade your plasma cutting precision with our high-quality drag cutting tips, engineered for seamless performance on thin metals. Whether you’re a professional fabricator or DIY enthusiast, these Italian-made tips deliver unmatched control and durability.
Core Specifications
| Quantity | 5 Each |
| Material | High-Quality Copper |
| Cutting Diameter | 0.9mm |
| Length | 21mm |
| Width | 11mm |
| Inner Diameter | 11mm |
| Compatibility | UNIMIG RAZOR Cut 40/45/80 Series |
| Protection Feature | Copper Screen Shield |
| Origin | Made in Italy |
| Application | Thin Metal & Sheet Metal Cutting |
Key Benefits
Our drag cutting tips eliminate double arcing and torch sticking, allowing direct workpiece contact for precise speed control. The copper screen design protects the nozzle, extending tool life while ensuring clean, accurate cuts on sheet metal and thin materials.
Compatible Models
- UNIMIG RAZOR Cut 40 (U14001K)
- UNIMIG RAZOR Cut 45 (KUPJRRW45, U14006K)
- UNIMIG RAZOR Cut 80 3-Phase (KUPJRRW80)
Performance & Quality
Manufactured to OEM standards in Italy, these tips meet strict quality benchmarks. The precision-engineered dimensions ensure perfect fit and optimal plasma flow, delivering consistent results across multiple cuts.
FAQ
Q: Will this fit non-UNIMIG plasma cutters?
A: Designed for UNIMIG RAZOR series; compatibility with other brands is not guaranteed.
Q: How does the drag tip improve cutting?
A: Eliminates double arcing and allows steady drag cutting for enhanced control on thin metals.
Ready to Enhance Your Cutting Efficiency?
Contact us now for bulk pricing, technical support, or compatibility verification. Our team of experts is ready to assist with your order!
Packaging & Transportation
Weldsuper Nozzles
Related products
2 ‘O’ Rings for AT1000 Air Filter Cartridge – Plasma Cutter
Product Introduction
2-pack high-quality hard rubber 'O' Rings designed for AT1000 compressed air filter cartridges, suitable for plasma cutters and sand blasters. Exceeds OEM standards, ensures perfect seal with proper torque application.
Product Parameters
| Quantity | 2 Pack |
| Material | High-Quality Hard Rubber |
| Inside Diameter | 118.34 |
| Outside Diameter | 125.24 |
| Torque Requirement | 15-18 nm |
6m Plasma Torch for Unimig Cut 45/80 Machine
Product Introduction
Designed for Unimig CUT 45 V1/V2 & CUT 80, the PT80 Plasma Torch features patented arc striking tech for high-quality, reliable cuts without high frequency, ensuring superior consumable life. Made in Italy to OEM standards for CNC equipment.Specifications
| Cutting Capacity | 20-30mm |
| Max Output | 80A |
| Duty Cycle | 60% @ 80A |
| Start Type | Pilot Arc |
| Origin | Italy |
AT1000 Compressed Air Filter Cartridge 6-Pack for Plasma Cutter
Product Introduction
Designed for plasma cutters and sand blasters, this 6-pack AT1000 compressed air filter removes sub-micro contaminants, moisture, and oil aerosols. Ensures clean, dry air to protect equipment, ideal for painters and pneumatic tools. Made in Italy with high-quality materials.Key Specifications
| Filtration | 0.01 micron |
| Max Flow | 1250 liters/min |
| Max Pressure | 125psi (8.5 bar) |
| Thread | 1/4" NPT |
| Pack Includes | 6 cartridges, brackets, hardware |
AT1000 Compressed Air Line Filter for Plasma Cutter-Sand Blaster-Spray Paint
Product Introduction
AT1000 compressed air line filter removes moisture, oil aerosol and 0.01¦Ìm contaminants for plasma cutters, sand blasters and spray painting. Ensures clean air supply to prevent torch damage, with high flow rate and easy installation.
Specifications
| Filtration | 0.01 micron |
| Max Flow | 1250 l/min |
| Max Pressure | 125psi (8.5 bar) |
| Thread | 1/4" NPT |
| Dimensions | 132mm x 200mm |
AT1000 Compressed Air Line Filter Replacement
Product Introduction
The AT1000 is a sub-microbic compressed air filter designed to reduce the smallest air contaminants, condensed moisture and oil aerosol for plasma cutters. It ensures clean, oil-free and dry compressed air to maintain machine performance, suitable for all plasma cutters.
Product Parameters
| Origin | Made in Italy |
| Package | 1 x Filters value pack |
| Length | 177mm |
| Width | 107mm |
| Inner Diameter | 37mm |
Plasma Cutter 65A Tip for Hypertherm Powermax 45XP/65/85/105 10 Pack
Product Introduction
High-quality 65A plasma cutter tip, compatible with Hypertherm Powermax 45XP/65/85/105. Made in Italy, matches OEM standards, ideal for precise cutting tasks. 10-pack offers great value for industrial use.Product Parameters
| Amperage Rating | 65A |
| Compatibility | Hypertherm Powermax 45XP/65/85/105 |
| OEM Part Number | 220819 |
| Quantity | 10 Pack |
| Origin | Italy |
SC30 Plasma Cutter Electrode 5pk Made in Italy
Product Introduction
High-quality plasma cutter electrode made in Italy, designed as a standard replacement for SC30 torch. Compatible with VIPER CUT30, UNIMIG Cut45, PC210 LC25 torch, WIA Cutmatic 45 SCP45 torch, and UNIMIG Viper Cut 30 Mk 1/2. Long-lasting performance for optimal cutting results.Product Parameters
| Origin | Made in Italy |
| Quantity | 5 Each |
| Compatibility | SC30, LC25, SCP45 Torches |
| Equivalent Part | UNIMIG WGSC2504 |
Viper Cut30 PT30 PT40 PT60 Plasma Torch 0.9mm Tip 5pk
Product Introduction
High-quality 0.9mm plasma cutting tip, made in Italy to OEM specifications. Compatible with Viper Cut30, PT30, PT40, PT60 torches and various UNIMIG, WIA, Lincoln machines. Long-lasting replacement with precise dimensions.Product Parameters
| Quantity | 5 Each |
| Cutting Tip Size | 0.9mm |
| Dimensions | 9mm width, 7mm inner diameter, 18.5mm length |
| Origin | Made in Italy |
| Compatibility | Viper Cut30, UNIMIG SC30, WIA SCP45 torches |