PT120 50-60A 1.1mm Plasma Cutting Tip 10pcs
$110.00
Product Introduction
High quality PT120 plasma cutting tip, made in Italy with copper material. Designed for 50-60A operation, suitable for 120 amp 3-Phase plasma cutters. Ensures clean, precise cuts with long-lasting performance. Includes 10 pieces per pack.
Product Parameters
| Model | PT120 |
| Current Rating | 50-60A |
| Tip Diameter | 1.0mm Nozzle |
| Material | Copper |
| Quantity | 10 Each |
PT120 50-60A 1.1mm Plasma Cutting Tip – 10 Pack
Upgrade your plasma cutting precision with our premium PT120 cutting tips, engineered for 50-60A 3-phase plasma cutters. Ideal for professionals seeking clean, detailed cuts and long-lasting performance.
Core Specifications
| Description | Plasma Cutting Nozzle |
| Amperage Range | 50-60A |
| Tip Diameter | 1.1mm |
| Material | High-Purity Copper |
| Quantity | 10 Pieces |
| Length | 28mm |
| Outer Diameter | 16mm |
| Inner Diameter | 15mm |
| Compatibility | 120A 3-Phase Cutters |
| Origin | Italy |
Key Benefits
- Precision Cutting: 1.1mm nozzle diameter for fine, detailed work
- Durable Construction: High-quality copper resists heat and wear
- Optimized Performance: Focused plasma arc for clean, burr-free cuts
- Cost-Effective Pack: 10-piece set reduces replacement frequency
- OEM Standard: Italian craftsmanship meets industrial quality requirements
Applications
Perfect for metal fabrication, automotive repair, industrial manufacturing, and HVAC work. Ideal for cutting mild steel, stainless steel, and aluminum with 120A 3-phase plasma systems.
Performance Advantage
Our copper nozzles maintain consistent gas flow and arc stability, delivering 30% longer service life compared to standard steel tips. The precision-machined orifice ensures minimal kerf width and maximum cutting efficiency.
Quality Assurance
Every tip undergoesÑϸñµÄ quality control, including dimensional accuracy checks and heat resistance testing. Manufactured to OEM specifications for reliable compatibility and performance.
Why Choose Our Tips?
Unlike generic alternatives, our Italian-made consumables offer:
– Tighter tolerances for better arc control
– Superior thermal conductivity
– Longer lifespan under continuous use
– Exact fit for 120A 3-phase plasma cutters
FAQ
Q: Will these fit my Unimig cutter?
A: These tips are designed to fit 120A 3-phase plasma cutters. Check your machine’s specifications for compatibility.
Q: What’s the difference between 1.1mm and larger nozzles?
A: Smaller diameters like 1.1mm provide finer precision, while larger openings are better for gouging applications.
Q: How many cuts can I expect per tip?
A: Average lifespan is 20-30 hours of continuous use, depending on material thickness and cutting conditions.
Ready toÌáÉý your plasma cutting results? Contact us today for bulk pricing and technical support!
Packaging & Transportation
Weldsuper Nozzles
Related products
1.0mm Contact Cutting Kit for 45A PT80 Plasma Cutter Drag Tip Italy
Product Introduction
Complete 1.0mm contact cutting kit for 45 Amp PT80 plasma cutter drag tip, made in Italy. Includes essential front-end consumables for Cut 45, Cut 80, Cut 40, and Tecmo 80 plasma cutters. Ensure proper protective gear when cutting.Product Parameters
| Origin | Italy |
| Compatibility | Cut 45, Cut 80, Cut 40, Tecmo 80, PT80 Torches |
| Kit Includes | 5¡Á1.0mm Cutting Tips, 1¡ÁShield Cap, 1¡ÁShield Cap Body |
| Type | Plasma Torch Consumables Kit |
2 ‘O’ Rings for AT1000 Air Filter Cartridge – Plasma Cutter
Product Introduction
2-pack high-quality hard rubber 'O' Rings designed for AT1000 compressed air filter cartridges, suitable for plasma cutters and sand blasters. Exceeds OEM standards, ensures perfect seal with proper torque application.
Product Parameters
| Quantity | 2 Pack |
| Material | High-Quality Hard Rubber |
| Inside Diameter | 118.34 |
| Outside Diameter | 125.24 |
| Torque Requirement | 15-18 nm |
50 Pack Shield Cap AG60 HF Pilot Arc Plasma Torch 60 Series
Product Introduction
High-quality ceramic Shield Cap, ideal for HF Pilot Arc Plasma Torch in 60 Series. Screw-on design ensures easy installation, suitable for various torch models. A pack of 50 for long-term use.Product Parameters
| Quantity | 50 Pack |
| Material | Highest Quality Ceramic |
| Current Rating | Up to 60 Amps |
| Type | Screw On |
| Compatibility | WSD-60P, P60, AG-60, AG60, SG-55, SG55 |
AT1000 Compressed Air Filter Cartridge 6-Pack for Plasma Cutter
Product Introduction
Designed for plasma cutters and sand blasters, this 6-pack AT1000 compressed air filter removes sub-micro contaminants, moisture, and oil aerosols. Ensures clean, dry air to protect equipment, ideal for painters and pneumatic tools. Made in Italy with high-quality materials.Key Specifications
| Filtration | 0.01 micron |
| Max Flow | 1250 liters/min |
| Max Pressure | 125psi (8.5 bar) |
| Thread | 1/4" NPT |
| Pack Includes | 6 cartridges, brackets, hardware |
Binzel PSB121 Plasma Torch Electrode 5 Pack SB801 743.0441
Product Introduction
Premium Binzel Style plasma torch electrode, 5-pack for PSB121 Air Cooled Torches. Made in Italy with high-quality materials, offering longer service life than standard spares. Essential consumable for reliable cutting performance.Product Parameters
| Type | Electrode |
| Part Number | SB801 |
| Cross Reference | 743.0077 |
| Compatibility | PSB 121 Air Cooled Torches |
| Quantity | 5 Pack |
O Ring for AT1000 Air Filter Cartridge – Plasma Cutter Sand Blaster
Product Introduction
High-quality hard rubber O Ring designed for AT1000 compressed air filter cartridges, compatible with plasma cutters and sand blasters. Ensures perfect seal, exceeding OEM standards for reliable performance in welding and cutting equipment.Product Parameters
| Material | High-Quality Hard Rubber |
| Inside Diameter | 118.34 |
| Outside Diameter | 125.24 |
| Torque Requirement | 15-18 nm |
| Standard | Exceeds OEM |
SC30 Plasma Cutter Electrode 5pk Made in Italy
Product Introduction
High-quality plasma cutter electrode made in Italy, designed as a standard replacement for SC30 torch. Compatible with VIPER CUT30, UNIMIG Cut45, PC210 LC25 torch, WIA Cutmatic 45 SCP45 torch, and UNIMIG Viper Cut 30 Mk 1/2. Long-lasting performance for optimal cutting results.Product Parameters
| Origin | Made in Italy |
| Quantity | 5 Each |
| Compatibility | SC30, LC25, SCP45 Torches |
| Equivalent Part | UNIMIG WGSC2504 |
Viper Cut30 PT30 PT40 PT60 Plasma Torch 0.9mm Tip 5pk
Product Introduction
High-quality 0.9mm plasma cutting tip, made in Italy to OEM specifications. Compatible with Viper Cut30, PT30, PT40, PT60 torches and various UNIMIG, WIA, Lincoln machines. Long-lasting replacement with precise dimensions.Product Parameters
| Quantity | 5 Each |
| Cutting Tip Size | 0.9mm |
| Dimensions | 9mm width, 7mm inner diameter, 18.5mm length |
| Origin | Made in Italy |
| Compatibility | Viper Cut30, UNIMIG SC30, WIA SCP45 torches |