Skip to navigation Skip to main content
  • English
    • Deutsch
    • French
    • Requires WPML plugin
  • Country
    • United States (USD)
    • Deutschland (EUR)
    • Japan (JPY)
FREE SHIPPING FOR ALL ORDERS OF $150
  • Newsletter
  • Contact Us
  • FAQs
Select category
  • Select category
  • Cigweld
    • 15kg – 1.0mm CIGWELD Autocraft LW1-6 Solid MIG Wire – 720094
  • Clearance
    • 0.9mm – 14kg INE BA71T11 Gasless MIG Wire E71T-11
    • 10 x 15A plug 3 Pin Male Extension Lead Plug – 240V 15 Amp
    • 10mm Double Ended Barb Kit for 10mm Hose (Inner Diameter)
    • 10x WP26 TIG Welding Torch Head + Valve Suits Lift / Scratch Start TIG
    • 15kg – 1.2mm Bohler FOXCORE 308L-T1 Flux Cored Stainless Steel MIG Wire
    • 15kg – 1.6mm Bossweld 71T-1 Flux Cored MIG Wire -PERTH ONLY
    • 4.5kg – 2.4mm Blue Demon ER1100 Aluminium TIG Filler Wire Rods Pure Aluminium 1100
    • 45Amp Weldclass Plasma Cutter – FORCE 45P
    • 5 Pin / Pol Male Amphenol Style Plug to suit Lincoln (LN7,8,9,25)
    • 5 x 15A plug 3 Pin Male Extension Lead Plug – 240V 15 Amp
    • 50 x Blue Nitrile Rubber O Ring NBR – OD 20mm ID 16.7mm – Not for Pyrex TIG kits.
    • 5kg – 1.6mm R60 High Test Mild Steel TIG Filler Welding Wire
    • Bossweld Oxy / Fuel Gas Torch Handle Blowpipe
    • CK MR180H 180 Degree Torch Head to Suit Micro Torch MR140
    • CK MR90H 90 Degree Torch Head to Suit Micro Torch MR140
    • Extender Block UM & UP Series M10 Thread – Strong Hand Tools
    • Female Amphenol Style Socket 10 Pol / Pin plug MS3106F18-1S – Suit Kemppi
    • Gas Torch Handle Oxy | Acetylene | LPG – Comet Style Blowpipe
    • Harris 142 Cutting Torch – Dual Fuel – Cuts to 200mm
    • Harris 825 Carbon Dioxide Co2 Flow Regulator Side Inlet 0-30lpm
    • Harris 90º LPG Hand Cutting Torch 1m Long – Model 625 Cuts up to 300mm
    • Harris Acetylene Copper Welding Brazing Tip Size 1
    • Harris Acetylene Copper Welding Brazing Tip Size 5
    • Harris Acetylene Flexible Brazing Welding Tip – Size 0090-3
    • Harris Acetylene Flexible Brazing Welding Tip – Size 0090-5
    • Harris Acetylene Flexible Brazing Welding Tip – Size 0090-6
    • Harris Acetylene Flexible Brazing Welding Tip – Size 0090-8
    • Harris E2-43 Mixer for Heating J633 Acetylene Tips
    • Harris Fuel High Flow Offset Flash Back Arrestor – Torch End FlashBack
    • Harris Oxygen High Flow Offset Flash Back Arrestor – Torch End FlashBack
    • Harris Regulator Extended Stem – 100mm Long Type 10 Argon Oxygen Helium stem
    • Kemppi DL Chili – Teflon Liner 3.0m 1.6mm – 1 Each
    • Kemppi MMT42 Swan Neck 50° – 1 Each
    • Kemppi Style MIG Contact Tips 0.8mm E-CU Aluminum – M8*35*0.8mm – 10 Each
    • Kemppi Style MIG Contact Tips 0.8mm E-CU Aluminum – M8*35*0.8mm – 100 Each
    • Kemppi Style MIG Contact Tips 0.8mm E-CU Aluminum – M8*35*0.8mm – 25 Each
    • Klingspor BRP 600 Z 178mm 7" Pipeline Brush, Knotted Wire for Steel
    • Klingspor NCD 200 Cleaning Wheel Flat Non-Woven 100 x 16mm – 10 Each – Clean and strip
    • Klingspor NCD 200 Cleaning Wheel Flat Non-Woven 100 x 16mm – 5 Each – Clean and strip
    • Klingspor NDS 555 Backing Pad Disc Multihole Medium 125mm – 1 Each
    • Lincoln Style Drive Roller kit V groove 1.0mm
    • MIG Drive Roller Gear 0.8/0.9mm U Groove 35mm x 25mm x 8mm
    • MIG Drive Roller Gear 0.9/1.0mm U Groove 30mm x 10mm x 19mm
    • MIG Drive Roller Gear 0.9/1.0mm V Groove 35mm x 25mm x 8mm
    • MIG Drive Roller Gear 1.0/1.2mm V Groove 30mm x 10mm x 12mm
    • MIG Drive Roller Gear 1.0/1.2mm V Groove 30mm x 10mm x 8mm
    • MIG Drive Roller Gear 1.0/1.2mm V Groove 35mm x 25mm x 8mm
    • MIG Drive Roller Gear 1.2/1.6mm Knurled 30mm x 10mm x 8mm for Gasless MIG Wire
    • MIG Geared Drive Roller for UNIMIG 350
    • Parweld TIG Torch – 170 Amp – 3.8 Meter – WP17 – Air Cooled
    • Parweld WP9 TIG Torch – 130 Amp – 3.8 Meter – Air Cooled
    • Quick Connect for Paton Welders – 1 Each
    • Strong Hand Extender Block to Suit UE UF UG Series Clamps – M10 Thread
    • Swan / Bent Goose Neck – MIG Spool Gun 45 Degree Torch Neck for QLBF-200 Binzel Style
    • TECNA 3720 Spot Welder Straight Electrodes for 4648 Pneumatic Spot Welder
    • TECNA 7900 Handheld Spot Welder Arm Set – 7516
    • TIG Female Amphenol Style Socket 10 Pol / Pin
    • TIG Female Amphenol Style Socket 6 Pol / Pin
    • TWECO #5 MIG Gas Nozzle / Shroud 20mm – 5 Each
    • TWECO #5 Style 20mm 25CT75 MIG Gas Nozzle / Shroud – 40 Each
    • UNIMIG CBR150 Plasma Extended Electrode – 1 each
    • UNIMIG CBR150 Plasma Extended Electrode – 5 Pack
    • Unimig U Groove Aluminium Roller 1.2mm for PPLU36 Push Pull Gun
    • UNIMIG V Groove Roller for TER MULTI-500 0.9mm and 1.2mm
    • UWELD Acetylene Regulator / Flow Meter 0-150 KPA
    • UWELD Oxygen / Acetylene Micro Buddy Torch Kit for Brazing with Hose, Oxygen and Acetylene Regulator
    • UWELD Oxygen / Acetylene Micro Torch Kit for Brazing
    • UWELD Oxygen / LPG Micro Torch Kit for Brazing
    • Weldclass Quick Coupler – Regulator Mount – Fuel Gas (Acetylene/LPG)
    • WITT 143-019 Flash Back Arrestor for Oxygen & Air
    • Workshop Welding Table Bench with Pullout Drawer Like Weldclass WC-06594
    • WP-9 8m Scratch start / Lift start TIG Torch Dinse 35-50
    • WP18 Water Cooled TIG Torch Body / Head with Valve
    • WP26 TIG Welding Torch Head + Valve Suits Lift / Scratch Start TIG
  • Electrodes & Wires
    • ARC
      • Arc Rod – Aluminium
      • Arc Rod – Cast Iron
      • Arc Rod – Mild Steel
      • Arc Rod – Stainless Steel
    • Brazing Rods / Silver Solder
      • 1 Stick 2.4mm 15% Silver Solder Brazing Rod
      • 1 x Stick Pack – 2.4mm 2% Silver Solder Brazing Rods
      • 1.6mm 50/50 Resin Core Solder – 500g
      • 1kg – 2.4mm 15% Silver Solder Brazing Rods
      • 1kg – 2.4mm 5% Silver Solder Brazing Rods – 750mm Long
      • 1kg 2.4mm 2% Silver Solder Brazing Rods
      • 1kg 45% Silver Solder Flux Coated Brazing Rods x 1.6mm
      • 2.3mm 50/50 Resin Core Solder – 500g
      • 200g 45% Silver Solder Flux coated Brazing Rods 1.6mm
      • 3 Sticks 1.6mm 45% Silver Solder Brazing Rods
      • 3 Sticks 45% Silver Solder Flux Coated Brazing Rods 1.6mm
      • 3.2mm 50/50 Resin Core Solder – 500g
      • 45% Silver Brazing Alloy 1.6mm 500g Handy Pack – 40 Sticks
      • 5 Sticks 1.6mm 45% Silver Solder Brazing Rods
      • 5% Silver Solder
      • Aluminium Brazing
    • MIG
      • 1080kg – 1.2mm COBRA E71T1 Flux Cored Welding Wire Spool FCAW
      • 15kg – 1.2mm Nippon Steel Flux Cored Welding Wire Weldream SF3AM – E81T-Ni1 M-H4
      • 15kg – 1.2mm Nippon Steel Metal Cored Welding Wire Weldream SM3A
      • 15kg – 1.2mm Nippon Steel Welding Wire Weldream SF-80AM
      • 15kg – 1.2mm Nippon Steel Welding Wire Weldream SM-80A
      • 15kg – 1.6mm Nippon Steel Flux Cored Welding Wire Weldream SF3AM
      • 15kg – 1.6mm Nippon Steel Metal Cored Welding Wire Weldream SM3A
      • 15Kg spool 1.2mm COBRA E71T1 Flux Cored Welding Wire Spool FCAW
      • Blue Demon 0.45kg Gasless 309L Stainless Steel 0.9mm MIG Welding Wire
      • MIG Wire – Aluminium
      • MIG Wire – Gasless
      • MIG Wire – Hard Facing
      • MIG Wire – Silicon Bronze
      • MIG Wire – Stainless Steel
    • MIG Wire – Mild Steel
      • 15kg Spool
      • 1kg Mini Spool
      • 5kg Spool
      • Bossweld ER70S-6 Layer Wound Mig Wire x 1.0mm x 15 Kg
      • Flux Cored
    • TIG
      • 1.6mm x 1kg Manganese Bronze Bare TIG / OXY Brazing Rods
      • 1.6mm x 1kg Tobin Bronze Bare TIG / OXY Brazing Rods
      • 1.6mm x 200g Manganese Bronze Bare TIG / OXY Brazing Rods
      • 1.6mm x 200g Tobin Bronze Bare TIG / OXY Brazing Rods
      • 1.6mm x 5kg Manganese Bronze Bare TIG / OXY Brazing Rods
      • 1.6mm x 5kg Tobin Bronze Bare TIG / OXY Brazing Rods
      • 1kg – 1.6mm Aluminium Bronze A2 TIG Filler / Brazing Wire
      • 1kg – 2.4mm Aluminium Bronze A2 TIG Filler / Brazing Wire
      • 1kg – 2.4mm ER2209 Duplex Stainless Steel TIG Wire ER2205
      • 2.0mm x 1kg Manganese Bronze Flux coated TIG / OXY Brazing Rods
      • 2.0mm x 200g Manganese Bronze Flux coated TIG / OXY Brazing Rods
      • 2.0mm x 5kg Manganese Bronze Flux coated TIG / OXY Brazing Rods
      • 2.4mm x 1kg Manganese Bronze Bare TIG / OXY Brazing Rods
      • 2.4mm x 1kg Manganese Bronze Flux coated TIG / OXY Brazing Rods
      • 2.4mm x 1kg Nickel Bronze Flux Coated TIG / OXY Brazing Rods
      • 2.4mm x 1kg Tobin Bronze Bare TIG / OXY Brazing Rods
      • 2.4mm x 1kg Tobin Bronze Flux Coated TIG / OXY Brazing Rods
      • 2.4mm x 200g Manganese Bronze Bare TIG / OXY Brazing Rods
      • 2.4mm x 200g Manganese Bronze Flux coated TIG / OXY Brazing Rods
      • 2.4mm x 200g Nickel Bronze Flux Coated TIG / OXY Brazing Rods
      • 2.4mm x 200g Tobin Bronze Bare TIG / OXY Brazing Rods
      • 2.4mm x 200g Tobin Bronze Flux Coated TIG / OXY Brazing Rods
      • 2.4mm x 5kg Manganese Bronze Bare TIG / OXY Brazing Rods
      • 2.4mm x 5kg Manganese Bronze Flux coated TIG / OXY Brazing Rods
      • 2.4mm x 5kg Nickel Bronze Flux Coated TIG / OXY Brazing Rods
      • 2.4mm x 5kg Tobin Bronze Bare TIG / OXY Brazing Rods
      • 2.4mm x 5kg Tobin Bronze Flux Coated TIG / OXY Brazing Rods
      • 200g – 1.6mm Aluminium Bronze A2 TIG Filler / Brazing Wire
      • 200g – 2.4mm Aluminium Bronze A2 TIG Filler / Brazing Wire
      • 3.2mm x 1kg Manganese Bronze Bare TIG / OXY Brazing Rods
      • 3.2mm x 1kg Manganese Bronze Flux coated TIG / OXY Brazing Rods
      • 3.2mm x 1kg Nickel Bronze Flux Coated TIG / OXY Brazing Rods
      • 3.2mm x 1kg Tobin Bronze Bare TIG / OXY Brazing Rods
      • 3.2mm x 1kg Tobin Bronze Flux Coated TIG / OXY Brazing Rods
      • 3.2mm x 200g Manganese Bronze Bare TIG / OXY Brazing Rods
      • 3.2mm x 200g Nickel Bronze Flux Coated TIG / OXY Brazing Rods
      • 3.2mm x 200g Tobin Bronze Bare TIG / OXY Brazing Rods
      • 3.2mm x 200g Tobin Bronze Flux Coated TIG / OXY Brazing Rods
      • 3.2mm x 5kg Manganese Bronze Bare TIG / OXY Brazing Rods
      • 3.2mm x 5kg Manganese Bronze Flux coated TIG / OXY Brazing Rods
      • 3.2mm x 5kg Nickel Bronze Flux Coated TIG / OXY Brazing Rods
      • 3.2mm x 5kg Tobin Bronze Bare TIG / OXY Brazing Rods
      • 3.2mm x 5kg Tobin Bronze Flux Coated TIG / OXY Brazing Rods
      • TIG Rod – Aluminium
      • TIG Rod – Mild Steel
      • TIG Rod – Silicon Bronze
      • TIG Rod – Stainless Steel
    • TIG Rod – Exotic
      • Magnesium Alloy
      • Manganese Bronze
      • Nickel Bronze
      • Techalloy 99 – Cast Iron
    • TIG Rod – Titanium
      • Grade 2 Titanium
      • Grade 5 Titanium
  • Gas
    • Acetylene Tips
      • Acetylene Welding Tips
      • Cutting Tips Type 41
      • Gouging Tips Type 41
      • Harris Style Cutting Tips
      • Micro Brazing Tips
      • Micro Cutting Tips
    • Bottle Restraints
      • 10 x Gas Bottle Holder | Restraint (Size 175mm – 185mm) Suits 9kg Fire Extinguisher Bunnings 5910386 5910224 5910384
      • 10x Gas Bottle Holder | Restraint (Size 100mm – 114mm) Suits C Size Steel
      • 10x Gas Bottle Holders | Restraint (Size 146mm – 162mm) Suits ACETYLENE D Size Steel
      • 10x Gas Bottle Holders | Restraint (Size 165mm – 181mm) Suits 9kg Fire Extinguisher Steel
      • 10x Gas Bottle Holders | Restraint (Size 184mm – 203mm) – Steel – Suits Bunnings 0013065 and 0013067
      • 10x Gas Bottle Holders | Restraint (Size 203mm – 222mm) Suits E Size Welding Bottle Steel
      • 10x Gas Bottle Holders | Restraint (Size 216mm – 229mm) Suits G Size Welding Bottle Steel
      • 10x Gas Bottle Holders | Restraint (Size 229mm – 248mm) Suits G Size Welding Bottle Steel
      • 10x Gas Bottle Holders | Restraint (Size 260mm – 270mm) Suits 4kg LPG Bottle Steel
      • 10x Gas Bottle Holders | Restraint (Size 300mm – 310mm) Suits 9kg & 15kg LPG Bottle Steel
      • 10x Gas Bottle Holders | Restraint (Size 368mm – 387mm) Suits 45kg LPG Gas Tank Steel
      • 10x Gas Bottle Holders| Restraint (Size 135mm – 146mm) Suits Pencil D Size Welding Bottle
      • Gas Bottle Holder | Restraint (Size 100mm – 114mm) Suits C Size Steel
      • Gas Bottle Holder | Restraint (Size 135mm – 146mm) Suits Pencil D Size Welding Bottle
      • Gas Bottle Holder | Restraint (Size 146mm – 162mm) Suits ACETYLENE D Size Steel
      • Gas Bottle Holder | Restraint (Size 165mm – 181mm) Suits D Size Argon bottle
      • Gas Bottle Holder | Restraint (Size 175mm – 185mm) Suits 9kg Fire Extinguisher Bunnings 5910386 5910224 5910384
      • Gas Bottle Holder | Restraint (Size 184mm – 203mm) – Steel – Suits Bunnings 0013065 and 0013067
      • Gas Bottle Holder | Restraint (Size 203mm – 222mm) Suits E Size Welding Bottle Steel
      • Gas Bottle Holder | Restraint (Size 216mm – 229mm) Suits G Size Welding Bottle Steel
      • Gas Bottle Holder | Restraint (Size 229mm – 248mm) Suits G Size Welding Bottle Steel
      • Gas Bottle Holder | Restraint (Size 260mm – 270mm) Suits 4kg LPG Bottle Steel
      • Gas Bottle Holder | Restraint (Size 300mm – 310mm) Suits 9kg & 15kg LPG Bottle Steel
      • Gas Bottle Holder | Restraint (Size 368mm – 387mm) Suits 45kg LPG Gas Tank Steel
    • Burners/ Heaters
      • Butane Gas Blow Torch Burner
      • Cast Iron Two Ring Burner Cooker Gas Stove LPG – Hose & Regulator
      • Deluxe Natural Gas Single Burner Gas Stove Gas Wok Cooker
    • CO2 Heaters
      • 5 x Co2 Spigot Regulator Heater 240v – BULK PACK – Pre Heater
      • Co2 Spigot Regulator Heater 240v – Pre Heater
      • COBRA Inline CO2 Gas Heater – Suits Standard Type 30 regulators and cylinders.
    • Cutters
      • Adjustable Chain for Gas Pipe Cutter Machine 2.4m LPG – Oxy/Acetylene Pipe Cutter Chain Pipemate
      • Beetle Twin Head Torch Conversion Kit for Quickie KC-12 Plate Cutter Dual
      • Comet Beetle Quickie Plate Gas Cutter Oxy/Fuel with 1.8m Track
      • Complete Quickie Plate Cutting Kit – Single Gas Torch Oxy / Fuel + 1.8m Track
      • Gas Pipe Cutter Machine with Chain for Oxy / Acetylene Cutting – Pipemate
      • Track for Quickie Plate Gas Cutting Machine 1.8m meter straight line cutter
    • Cutting Tips
      • 1 x Harris 6290 000NX LPG Cutting Tip 0-5mm
      • 1 x Harris 6290 00NX LPG Cutting Tip 5-10mm
      • 1 x Harris 6290 0NX LPG Cutting Tip 10-15mm
      • 1 x Harris 6290 1NX LPG Cutting Tip 15-25mm
      • 1 x Harris 6290 2NX LPG Cutting Tip 25-50mm
      • 1 x Harris 6290 3NX LPG Cutting Tip 50-75mm
      • 1 x Harris 6290 4NX LPG Cutting Tip 75-150mm
      • 1 x Harris 6290 5NX LPG Cutting Tip 150-200mm
      • 10x Type 41 Size 10 Comet Cutting Tip Nozzle – Oxy | Acetylene
      • 10x Type 41 Size 12 Comet Cutting Tip Nozzle – Oxy | Acetylene
      • 10x Type 41 Size 15 Comet Cutting Tip Nozzle – Oxy | Acetylene
      • 10x Type 41 Size 20 Comet Cutting Tip Nozzle – Oxy | Acetylene
      • 10x Type 41 Size 24 Comet Cutting Tip Nozzle – Oxy | Acetylene
      • 10x Type 41 Size 32 Comet Cutting Tip Nozzle – Oxy | Acetylene
      • 10x Type 41 Size 6 Comet Cutting Tip Nozzle – Oxy | Acetylene
      • 10x Type 41 Size 8 Comet Cutting Tip Nozzle – Oxy | Acetylene
      • 10x Type 44 Size 12 Comet Cutting Tip Nozzle – Oxy | LPG Cuts 12mm to 20mm
      • 10x Type 44 Size 15 Comet Cutting Tip Nozzle – Oxy | LPG Cuts 20m to 80mm
      • 10x Type 44 Size 20 Comet Cutting Tips Nozzle – Oxy | LPG Cuts 75mm to 125mm
      • 10x Type 44 Size 24 Comet Cutting Tips Nozzle – Oxy | LPG Cuts 125mm to 200mm
      • 10x Type 44 Size 32 Comet Cutting Tips Nozzle – Oxy | LPG Cuts 200mm to 300mm
      • 10x Type 44 Size 6 Comet Cutting Tip Nozzle – Oxy | LPG Cuts 1mm to 6mm
      • 10x Type 44 Size 8 Comet Cutting Tip Nozzle – Oxy | LPG Cuts 6mm to 12mm
      • 2 x Harris 6290 000NX LPG Cutting Tip 0-5mm
      • 2 x Harris 6290 00NX LPG Cutting Tip 5-10mm
      • 2 x Harris 6290 0NX LPG Cutting Tip 10-15mm
      • 2 x Harris 6290 1NX LPG Cutting Tip 15-25mm
      • 2 x Harris 6290 2NX LPG Cutting Tip 25-50mm
      • 2 x Harris 6290 3NX LPG Cutting Tip 50-75mm
      • 2 x Harris 6290 4NX LPG Cutting Tip 75-150mm
      • 2 x Harris 6290 5NX LPG Cutting Tip 150-200mm
      • 5 x Harris 6290 000NX LPG Cutting Tip 0 – 5mm
      • 5 x Harris 6290 00NX LPG Cutting Tip 5-10mm
      • 5 x Harris 6290 0NX LPG Cutting Tip 10-15mm
      • 5 x Harris 6290 1NX LPG Cutting Tip 15-25mm
      • 5 x Harris 6290 2NX LPG Cutting Tip 25-50mm
      • 5 x Harris 6290 3NX LPG Cutting Tip 50-75mm
      • 5 x Harris 6290 4NX LPG Cutting Tip 75-150mm
      • 5 x Harris 6290 5NX LPG Cutting Tip 150-200mm
      • Harris 1AC Acetylene Cutting Tip 15-25mm – 1 Each
      • Harris 1AC Acetylene Cutting Tip 15-25mm – 5 Each
      • Harris 2AC Acetylene Cutting Tip 25-50mm – 1 Each
      • Harris 2AC Acetylene Cutting Tip 25-50mm – 5 Each
      • Type 41 Size 15 Comet Cutting Tip Nozzle – Oxy | Acetylene
      • Type 44 3 Piece Comet Cutting Tip Nozzle – Oxy | LPG
      • Type 44 Size 6 Comet Cutting Tip Nozzle – Oxy | LPG Cuts 1mm to 6mm
    • Disposable Gas Bottles
      • 1 x Bromic 1 litre Disposable Oxygen Gas Bottle – 12mm Thread – 400300 – Made in Italy
      • 1 x Bromic 1.56 litre Disposable Oxygen Gas Bottle – 12mm Thread 400300 – Made in Italy
      • 1 x Bromic 2.2 litre Disposable Oxygen Gas Bottle – 12mm Thread
      • 12x Bromic R600a Isobutane Disposable Refrigerant Gas Cylinder – 420g
      • 2 x Bromic 1.56 litre Disposable Oxygen Gas Bottle – 12mm Thread 400300 – Made in Italy
      • 2 x Bromic 2.2 litre Disposable Oxygen Gas Bottle – 12mm Thread
      • 2 x Bromic Disposable Oxygen Gas Bottle 1.56 Litre – Combo Kit – Made in Italy
      • 2 x Disposable Nitrogen Gas Bottle 2.2 Litre + Regulator & Hose Combo Kit
      • 2x Disposable Gas Bottles – ARGON / CO2 – 2.2 Litre
      • 2x Disposable Gas Bottles – PURE Argon – 2.2 Litre
      • 4 x Bromic 1 Litre Disposable Oxygen Gas Bottle – 12mm Thread 400300 – Made in Italy
      • 4 x Bromic 1.56 litre Disposable Oxygen Gas Bottle – 12mm Thread 400300 – Made in Italy
      • 4 x Bromic 2.2 litre Disposable Oxygen Gas Bottle – 12mm Thread
      • 5 x O ring for Disposable Gas Bottle Regulator – Argon / CO2 – 10mm
      • 6 x Bromic Disposable Oxygen Gas Bottle 1.56 Litre – Combo Kit – Made in Italy
      • 6 x Disposable Gas Bottle – Pure Argon – 2.2 Litre
      • 6x Disposable Gas Bottle – Argon / Co2 – 2.2 Litre
      • Bromic Disposable Gas Bottle – PURE OXYGEN 1 x 1 litre Bottle Combo – Made in Italy
      • Bromic Disposable Gas Bottle – PURE OXYGEN 1 x 2.2 litre Bottle Combo
      • Bromic Disposable Gas Bottle – Pure Oxygen 2 x 1 litre Bottle Combo – Made in Italy
      • Bromic Disposable Gas Bottle – Pure Oxygen 2 x 2.2 litre Bottle Combo
      • Bromic Disposable Gas Bottle – Pure Oxygen 6 x 1 litre Bottle Combo – Made in Italy
      • Bromic Disposable Gas Bottle – Pure Oxygen 6 x 2.2 litre Bottle Combo
      • Bromic Disposable Oxygen Gas Bottle 1.56 Litre – Combo Kit – Made in Italy
      • Bromic R290 Propane Disposable Refrigerant Gas Cylinder – 370g
      • Bromic R600a Isobutane Disposable Refrigerant Gas Cylinder – 420g
      • Disposable ARGON Gas Bottle 2.2 Litre – 2 x Bottle Combo Kit
      • Disposable ARGON Gas Bottle 2.2 Litre – Combo Kit
      • Disposable Gas Bottle – ARGON / CO2 – 2.2 Litre
      • Disposable Gas Bottle – ARGON | CO2 – 2.2 Litre – 2 x Bottle Combo Kit
      • Disposable Gas Bottle – PURE Argon – 2.2 Litre
      • Disposable Gas Bottle ARGON | CO2 – 2.2 Litre – Combo Kit
      • Disposable Gas Bottle Regulator – Argon / CO2 – 10mm
      • Disposable Gas Bottle Regulator Conversion – Argon /CO2 – Scratch Lift Start TIG
      • Disposable Nitrogen Gas Bottle 2.2 Litre – Combo Kit
    • Disposable Gas Gear
      • 1 x Zip Gas 91295 Sparkling Water Disposable Food Grade CO2 Bottle Billi 996911 Keg – Made in Italy
      • 1m Portable oxy MAPP gas Welding Cutting Brazing Torch to suit Hot Devil Brazing Kit
      • 2 x Bromic 1 litre Disposable Oxygen Gas Bottle – 12mm Thread – 400300 – Made in Italy
      • 2 x Zip Gas 91295 Sparkling water Disposable Food Grade CO2 bottle Billi 996911 Keg – Made in Italy
      • 3 x Zip Gas 91295 Sparkling water Disposable Food Grade CO2 bottle Billi 996911 Keg – Made in Italy
      • 4 x Bromic Disposable Nitrogen Mix Food Grade Cylinder 2.2L Value Pack
      • 4 x Zip Gas 91295 Sparkling water Disposable Food Grade CO2 bottle Billi 996911 Keg – Made in Italy
      • AC36 Valve Adaptor for R290 & R600 disposable Refrigerant Cylinders
      • Bernzomatic 400g MAP-PRO Mapp Gas Bottle – 12 Each
      • Bromic Disposable Nitrogen Mix Food Grade Cylinder 2.2L
      • COBRA Braze-O Matic Portable Oxy/Mapp HVAC Brazing & Heating Kit – No Bottles
      • Disposable Food Grade Co2 Gas Bottle 2.2 Litre – 2 x Bottle Combo Kit
      • Disposable Food Grade Co2 Gas Bottle 2.2 Litre – Combo Kit
      • Disposable Oxygen Bottle Regulator to Suit 12mm Thread
      • Disposable PURE CO2 Gas Bottle 2.2 Litre – 2 x Bottle Combo Kit
      • Disposable PURE CO2 Gas Bottle 2.2 Litre – Combo Kit
      • Tips for UWELD Braze-O-Matic kit mapp tip Brazing portable oxy heating spare
      • TS8000 Style Mapp Turbo Blow Heating Torch w/ Trigger Start Bernzomatic Style
      • Ultrabond Aluminium Brazing Kit – 30 x Brazing Rods + MAPP Gas Blow Torch & S/S Wire Brush
    • Flashback Arrestors
      • COBRA Fuel Gas Flashback Arrestor – Quick Connect Coupler – Regulator End
      • COBRA Fuel Gas Flashback Arrestor – Quick Connect Coupler – Torch End
      • COBRA Fuel Gas Flashback Arrestor – Regulator End
      • COBRA Fuel Gas Flashback Arrestor – Torch End
      • COBRA Oxygen & Fuel Flashback Arrestors – Quick Connect Coupler – Regulator & Torch End Quad Pack
      • COBRA Oxygen & Fuel Gas Flashback Arrestor – Quick Connect Coupler – Regulator End Twin Pack
      • COBRA Oxygen & Fuel Gas Flashback Arrestor – Quick Connect Coupler – Torch End Twin Pack
      • COBRA Oxygen & Fuel Gas Flashback Arrestors – Regulator & Torch End Quad Pack
      • COBRA Oxygen & Fuel Gas Flashback Arrestors – Regulator End Twin Pack
      • COBRA Oxygen & Fuel Gas Flashback Arrestors – Torch End Twin Pack
      • COBRA Oxygen Gas Flashback Arrestor – Quick Connect Coupler – Regulator End
      • COBRA Oxygen Gas Flashback Arrestor – Quick Connect Coupler – Torch End
      • COBRA Oxygen Gas Flashback Arrestor – Regulator End
      • COBRA Oxygen Gas Flashback Arrestor – Torch End
    • Flint Lighters
      • 10 x Flints For Pistol Style Flint Lighter
      • 50 x Flints For Pistol Style Flint Lighter
      • Non Flint Spark Lighter – Electronic – Lightnin' Bug – 1 Each
      • Pistol Style Flint Lighter – Trigger Spark Lighter – 1 Each
      • Triple Flint Spark Lighter – 10 PACK
      • Triple Spark Flint Lighter Refills – 50 Pack
    • Gas Kits
      • Acetylene Welding, Brazing & Cutting Porta Pack Carry Case only Bottle Holder Carrier
      • COBRA Braze-O Matic Portable Oxy/Mapp HVAC Brazing & Heating Kit with FREE Bottle Holder Carrier- No Bottles
      • LPG
      • Oxygen & Acetylene
      • Oxygen & LPG
      • Type 30 Nut and Stem for Uweld Co2 Regulator – 1 Each
    • LPG Tips
      • Brazing Tips Type 554
      • Cutting Tips Type 44
      • Gouging Tips Type 44
      • Harris Cutting Tips
      • Little Torch Tips
      • Micro Cutting Tips
    • Miscellaneous Gas Gear
      • 10 Pack Nozzle Tip Cleaner for Oxy Acetylene & LPG
      • Bossweld Combination Regulator / Bottle Spanner
      • Bossweld Combination Regulator / Bottle Spanner – 5 Each
      • CO2 Sodastream Bottle Refilling Adapter Kit with Bleed Valve Soda Stream
      • COBRA Gauge Guard for Yildiz Regulators
      • Forklift to POL 9kg LPG Bottle Adapter – BBQ Gas Bottle Fork lift Adaptor
      • Kegland FreedomOne Sodastream Adapter Hose MKII – 36inch
      • Regulator Gauge Cage – Stem Mount Guard for Regulator Gauges 1 – Each
    • Mixers
      • 10mm (3/8") Mixer – Oxy | Acetylene | LPG Gas – for Brazing tips CIGWELD style 304003 UF3M
      • 10x 10mm (3/8") Mixer – Oxy | Acetylene | LPG Gas – for Brazing tips CIGWELD style 304003 UF3M
      • 10x 13mm (1/2") Mixer – Oxy | Acetylene | LPG Gas – for Super-Heating Barrel
      • 13mm (1/2") Mixer – Oxy | Acetylene | LPG Gas – for Super-Heating Barrel
      • Harris Adaptor for Gas Mixer TH119 to Suit Flexible Brazing Tips – 430111
    • No Rent Gas Bottles
      • 15Kg Forklift LPG Gas Cylinder Bottle – No Rent
      • 2.6kg C Size Food Grade Co2 Gas Bottle for Brewing / Welding – No Rent
      • 6kg Food Grade CO2 D Size Gas Bottle for Brewing / Welding – No Rent
      • Acetylene C Size Welding Gas bottle – No Rent
      • Acetylene D Size Welding Gas bottle
      • Acetylene E Size Welding Gas bottle
      • Acetylene G Size Welding Gas bottle
      • Acetylene Industrial E Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Acetylene Industrial E Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • Acetylene Industrial G Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Acetylene Industrial G Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • Argon / Co2 C Size Welding Gas bottle – No Rent
      • Argon / Co2 D Size Welding Gas bottle – NO RENT
      • Argon / Co2 E Size Welding Gas Bottle – NO RENT
      • Argon / Co2 G Size Welding Gas Bottle – NO RENT
      • Argon 4.2 D Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Argon 4.2 D Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • Argon 4.2 E Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Argon 4.2 E Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • Argon 4.2 G Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Argon 4.2 G Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • Argon 98% / 2% Oxygen Stain Shield G Size Welding Gas Bottle – NO RENT
      • Argon E Size Welding Gas Bottle – NO RENT
      • Argoshield 52 Industrial G Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Argoshield 52 Industrial G Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • Argoshield Light E Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Argoshield Light E Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • Argoshield Light G Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Argoshield Light G Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • Argoshield Universal E Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Argoshield Universal E Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • Argoshield Universal G Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Argoshield Universal G Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • Balloon Gas D Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Balloon Gas D Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • Balloon Gas E Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Balloon Gas E Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • Balloon Gas G Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Balloon Gas G Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • C Size Argon 4.2 TIG Welding Gas Starter Kit – Cylinder, Reg and Hose
      • C Size Argon 5/2 MIG Welding Gas Starter Kit – Cylinder, Reg and Hose
      • Carbon Dioxide Food Grade D Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Carbon Dioxide Food Grade D Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • Carbon Dioxide Food Grade E Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Carbon Dioxide Food Grade E Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • Cellamix 55 F Size Cylinder with Gas – Sydney, Melbourne, Brisbane Only
      • Cellamix 55 F Size Swap/ Exchange – Sydney, Melbourne, Brisbane Only
      • CO2 G Size Welding Gas Bottle – No Rental Fee
      • CO2 Soda Stream Sodastream Refilling Adapter + C Size Food Grade CO2 Bottle
      • CO2 Soda Stream Sodastream Refilling Adapter + Food Grade D Size Bottle
      • D Size Argon / Co2 5.2 Swap / Exchange
      • D Size Argon 4.2 Gas Swap / Exchange
      • D Size Beer Mix 55/45 Cylinder & Gas – No Rental Fee
      • D Size Stout Mix 70% Nitrogen / 30% Co2 Cylinder & Gas – No Rental Fee
      • D Size Tracer Nitrogen/Hydrogen Mix 95/5 Gas bottle – NO RENT
      • G Size Beer Mix 55/45 Cylinder & Gas – No Rental Fee
      • G Size Oxygen Gas Bottle – No Rent
      • G Size Stout Mix 70% Nitrogen / 30% Co2 Cylinder & Gas – No Rental Fee
      • Nitrogen C Size Gas Bottle – No Rent
      • Oxygen C Size Welding Gas Bottle – No Rental Fee – Small Oxygen – Jewelry -HVAC
    • Regulators & Flowmeters
      • 1 x CO2 Regulator White O Ring Seal
      • 10 x CO2 Regulator White O Ring Seal.
      • 2 x Harris 866 Argon / Co2 Flowmeter 0-15 Lpm with Soft Seat Valve
      • 5 x CO2 Regulator White O Ring Seal
      • Acetylene
      • Argon
      • Argon | Helium Mixing Kit – for Aluminium Welding
      • Argon CO2 25Ltr Gas Flow Ball Meter Tester – MADE IN ITALY
      • CO2
      • COBRA Pipeline System Argon Line Pressure Regulator 0-30l/min
      • COBRA Pipeline System Fuel Gas Installation Set
      • COBRA Pipeline System Medium Scale Acetylene Gas Manifold System – 1.5 Bar
      • COBRA Pipeline System Medium Scale Argon Manifold System – 10 Bar
      • COBRA Pipeline System Oxygen / Argon Installation Set
      • Helium
      • Hydrogen
      • LPG
      • Mapp Gas
      • Nitrogen
      • O Rings for Regulators – 10 pack – BW10003 – Black or Red
      • O Rings for Regulators – 5 pack – BW10003 – Black or Red
      • Oxygen
      • Replacement Regulator Gauges
      • Tip Nut to Suit Comet Standard Cutting Attachment – 304014
    • Roller Guide & Radius Bar
      • Gas Cutting Torch Radius Bar Type 41/44
      • Gas Cutting Torch Roller Guide & Radius Bar Type 41/44
      • Gas Cutting Torch Roller Guide Type 41/44 Cigweld Style 308729
    • Super Heating
      • Barrels
      • Tips
    • Torch Handles
      • 180° Gas Cutting Attachment Torch 500mm – Oxy | Acetylene | LPG
      • 520mm Oxygen and LPG Cutting Torch 90 Degree Head
      • Cigweld Comet 3 Gas Hand Torch Oxy | Acetylene | LPG
      • COBRA 180 degree Gas Cutting Attachment Torch 250mm – To Suit Cigweld Comet 3 Style Tips
      • COBRA Gas Cutting Attachment Oxy | Acetylene | LPG – CIG Comet Compatible
      • COBRA Gas Torch Handle Oxy | Acetylene | LPG – Comet Compatible – Blowpipe
      • COBRA Torch Handle + Cutting Attachment Oxy | Fuel – Comet Compatible
      • European Made Gas Economiser for Acetylene
      • Harris 180º ACETYLENE Hand Cutting Torch 1250mm Long – Model 625 Cuts up to 300mm
      • Harris 180º LPG Hand Cutting Torch 1250mm Long – Model 625 Cuts up to 300mm
      • Harris 187 Metal Puddle/Powder Spray Torch Kit
      • Harris 242 Series Cutting Torch – Dual Fuel – 480mm long
      • Harris 432 Professional Handle Oxy Fuel w/ Flash Guards 43-2
      • Harris 90º OXY / LPG Hand Cutting Torch 1500mm Long
    • Track Restraints
      • 1000mm Track Combos
      • 200mm Track Combos
      • 400mm Track Combos
      • 500mm Track Combos
      • 600mm Track Combos
      • Gas Bottle Holder Restraint 100mm Track | 400mm Strap AUSTRALIAN MADE
      • Gas Bottle Holder Restraint 100mm Track | 600mm Strap AUSTRALIAN MADE
      • Gas Bottle Holder Restraint 1m Track | 2x 1200mm Strap will suit a 45kg LPG gas bottle. AUSTRALIAN MADE
      • Gas Bottle Holder Restraint 1m Track | 2x 600mm Strap AUSTRALIAN MADE
      • Gas Bottle Holder Restraint 1m Track | 3 x 600mm Strap AUSTRALIAN MADE
      • NobleFix Curved Bottle Brackets with 600mm Strap
    • Weed Burners
      • German Made Harris Perkeo 801 LPG Scorcher Heating Torch Kit 10m Hose Weed burner
      • German Made Harris Perkeo LPG Scorcher Heating Dual Torch Kit 6m Hose Weed burner
      • German Made Harris Perkeo LPG Scorcher Heating Torch Kit 6m Hose Weed burner
      • Harris 20mm Diameter Burner Head for Perkeo Scorcher HKAL601 / 801
      • Harris 25mm Burner Head for Perkeo Scorcher HKAL601 / 801
      • Harris 40mm Burner Head for Perkeo Scorcher HKAL601 / 801
      • Harris 60mm Burner Head for Perkeo Scorcher HKAL601 / 801
      • Hot Devil Style Weed Torch Burner – Weed killer & Weed burner Garden Killer
    • Welding Flux
      • Cigweld Comweld Aluminium Flux – 250g
      • Type B Solar Welding Flux 1Lb – Purge Replacement
    • Welding Hose
      • 5mm Red Water Hose for WP18 TIG Torch – 4 Meter Length
      • Adapters
      • Argon
      • Fittings
      • Oxy Acetylene
      • Oxy LPG
    • Welding Hoses
      • 2m Argon Hose Quick Connect Fitting to suit Regulator – Suits Kemppi UNIMIG Machines
      • 3mm Braided Flexi Hose for Little Torch – 2m – Red and Blue
      • 3mm Braided Flexi Hose for Little Torch – 3m – Red and Blue
      • 3mm Braided Flexi Hose for Little Torch – 5m – Red and Blue
      • 5mm Blue Water Hose for WP18 TIG Torch – 1 Meter Length
      • 5mm Blue Water Hose for WP18 TIG Torch – 4 Meter Length
      • 5mm Blue Water Hose for WP18 TIG Torch – 8 Meter Length
      • 5mm Red Water Hose for WP18 TIG Torch – 1 Meter Length
      • 5mm Red Water Hose for WP18 TIG Torch – 8 Meter Length
  • Hampdon
    • COBRA Tungsten Sharpener grinder kit Cordless
  • Lincoln
    • Lincoln LC105 Plasma Consumable Kit
  • Made in Australia
    • 1 Stick 1.6mm 56% Silver Solder Brazing Rods – Blue Tip
    • 12 x Bakers Soldering Fluid Flux – 250ml
    • 12 x Dy-Mark Zinc Guard Silver Zinc Metallic Silver 400g – Australian Made
    • 1kg of 50/50 Solder Sticks 12mm x 8mm x 390mm – 4 Sticks
    • 3 Sticks 1.6mm 56% Silver Solder Brazing Rods – Blue Tip
    • 30/70 Car Body Solder Stick (30% Tin 70% Lead) 1.8kg – 4 stick value pack
    • 30/70 Car Body Solder Stick (30% Tin 70% Lead) 450g – 1 Stick
    • 36x Dy-Mark Cold Galv Zinc Galvanizing Compound 400g Aerosol Australian Made
    • 36x Dy-Mark Zinc Guard Silver Zinc Metallic Silver 400g – Australian Made
    • 42 Sticks (500g) 1.6mm 56% Silver Solder Brazing Rods – Blue Tip
    • 5 Sticks 1.6mm 56% Silver Solder Brazing Rods – Blue Tip
    • 50/50 Solder Stick 12mm x 8mm x 390mm – 1 Stick
    • 5kg of 50/50 Solder Sticks 12mm x 8mm x 390mm – 20 Sticks
    • 6 x Bakers Soldering Fluid Flux – 250ml
    • 6 x Dy-Mark Cold Galv Zinc Galvanizing Compound 400g Aerosol Australian Made
    • 6 x Dy-Mark Zinc Guard Silver Zinc Metallic Silver 400g – Australian Made
    • 602 Silver Solder Brazing Flux – 200g Jar
    • ABLE Westchem Soluble Cutting Oil – 20 Litre
    • Australian Made Circle Cutting Guide to suit Hypertherm DuraMax HyAmp 125 – TJ1204D
    • Bakers Soldering Fluid Flux – 250ml
    • CA 303 Flux Copper & Brass Flux 250g – OXY LPG Brazing
    • Circle Cutting Guide Gas Torch for Comet Type 41 / 44 – TJ1081A AUSTRALIAN MADE
    • DFL8 Automatic Tyre Deflators – Gold – Set & Forget – 5 to 30PSI – Set of 4
    • DFL8 Automatic Tyre Deflators – Orange – Set & Forget – 5 to 30PSI – Set of 4
    • Dy-Mark Cold Galv Zinc Galvanizing Compound 400g Aerosol Australian Made
    • Dy-Mark Zinc Guard Silver Zinc Metallic Silver 400g – Australian Made
    • EZI WELD 801 Soldering Fluid Flux – 250ml
    • Pipe Flange Alignment Pins Red – 1 Pair – Australian Made
    • PT30 Plasma Cutting Guide Kit – Suits PT30 Xcalibur Cut40/60 | PT60
    • Roller Guide for Thermal Dynamics SL60/SL100 Plasma Torches
    • Roller Guide for Unimig Razor SC80 Cut 45 / Cut 80 Plasma Torch AUSTRALIAN MADE
    • SC80 45 / 80 Amp Plasma Circle Cutting Guide Kit to Suit Unimig
    • Tanjant Radius Bar for Roller Guide AUSTRALIAN MADE
    • Tanjant Roller Guide for Gas Torch AUSTRALIAN MADE
    • Tanjant Type 41 | 44 Kit for Gas Cutting Torch Kit AUSTRALIAN MADE
    • Thermal Dynamics SL60/SL100 Plasma Cutting Guide Kit AUSTRALIAN MADE
    • To Suit CIGWELD CutSkill 35/45 SC30 Plasma Cutting Guide Kit AUSTRALIAN MADE
    • Ultrabond 3.2mm Aluminium Brazing Rod – 1 Stick
    • UltraBond 3.2mm Aluminium Brazing Rod – 10 Stick Pack
    • UltraBond 3.2mm Aluminium Brazing Rod – 30 Stick Pack
    • UltraBond 3.2mm Aluminium Brazing Rod – 5 Stick Pack
    • XDP2000 Cutting Fluid – Water Soluble – 1 Litre – 81210 – 10 Each
    • XDP2000 Cutting Fluid – Water Soluble – 1 Litre – 81210 – 5 Each
    • XDP2000 Cutting Fluid – Water Soluble – 1 Litre – 81210-1
  • MIG
    • Anti Spatter + Nozzle Dip
      • 4 x MIG Nozzle Tip Dip Gel 300G Tin – Anti Spatter
      • 400ml Ceramic Anti Spatter Spray – 1 Each
      • 400ml Ceramic Anti Spatter Spray – 5 Each
      • 400ml Non-Flammable Anti Spatter Whale Spray
      • 400ml Non-Flammable Anti Spatter Whale Spray – 12 Each
      • 400ml Non-Flammable Anti Spatter Whale Spray – 6 Each
      • MADE IN AUSTRALIA – Blue 5L Water Based Welding Anti Spatter
    • Bernard Style
      • Accessories
      • Consumable Combo Kits
      • Contact Tips Long
      • Contact Tips Short
      • Gas Nozzles
      • Guns – Complete
      • Head Assemblies / Diffusers
      • Liners Steel
      • Liners Teflon
    • Binzel Style
      • Accessories
      • Consumable Combo Kits
      • Contact Tips M5 (Migmate)
      • Contact Tips M6
      • Contact Tips M8
      • Gas Diffusers
      • Gas Nozzles
      • Guns Complete
      • Steel Liners
      • Swan Necks
      • Teflon Liners
      • Tip Holders
    • Bossweld Bernard Style Steel Liner 1.2 – 1.6mm x 4.8 Meter (200 & 300)
    • Contact Tips
      • 10 Pack of Bernard MIG Gas Diffuser / Head 4435 for Short Contact Tips
      • 40 Pack of Bernard MIG Gas Diffuser / Head 4435 for Short Contact Tips
      • 5 Pack of Bernard MIG Gas Diffuser / Head 4435 for Short Contact Tips
      • Bernard MIG Gas Diffuser / Head 4435 for Short Contact Tips Suits 400 Amp Torches
      • ESAB Style MIG Contact Tips 0.6mm x M6 – 10 Pack – M6 x 0.6mm
      • ESAB Style MIG Contact Tips 0.6mm x M6 – 30 Pack – M6 x 0.6mm
      • ESAB Style MIG Contact Tips 0.8mm x M6 – 10 Pack – M6 x 0.8mm
    • ESAB Style
      • Contact Tips
      • ESAB Mig Tip holder / Adapter PSF 505 – 5 Each
      • Gas Nozzles And Insulators
      • Liners
      • Swan Necks
      • Tip Adapters
    • Fronius Style
      • Contact Tips
      • Fronius Style MIG Gas Nozzle / Shroud AL2300 and AW2500 – 5 Pack – 42.0001.5173
      • Gas Diffuser's
      • Nozzle Holders
      • Nozzle's
      • Tip Adaptor's
    • Guns
      • 240 Amp – 6m MIG Spool Gun to suit Unimig – Euro 9 Pin – Aluminium Value Pack
      • 240 Amp – 6m MIG Spool Gun to suit UNIMIG- Euro 9 Pin – Aluminium Value Pack – U41014
      • 6m – MB24 Binzel Spool Gun Torch to suit Unimig – Euro Fitting – 24V – 9 Pin
      • 6m 240 Amp MIG Spool Gun to suit UNIMIG Razor 230 and Viper 195 – U41017
      • 6m MIG Spool Gun to suit UNIMIG 4 Pin 180 Amp also 600126, 600156, 600186 – Euro – Aluminium Value Pack
      • 6m MIG Spool Gun to suit UNIMIG 4 Pin 240 Amp also 600126, 600156, 600186 – Euro
      • 70° Swan Neck to Suit K126 MIG Welding Innershield Gun
      • 8m Spool Gun Value Pack – 240 Amp to suit CIGWELD MIG Machines – W4011250
    • Insulators
      • 40 x MIG Nozzle Insulator – PSF 315/400 – ESAB Style
    • kemppi Style
      • Consumable Kits
      • Contact Tips
      • Gas Nozzles
      • Liners
      • Rollers
      • Swan Neck
    • Lincoln Style
      • Accessories
      • Contact Tips
      • Guns Complete
    • Liners
      • 10x Bernard style MIG Liner Steel – 300A to 400A- 4.8 Meter – 0.8 to 1.2mm
      • 10x Bernard style MIG Liner Steel – 300A to 400A- 4.8 Meter – 1.2 to 1.6mm
      • 10x MIG Liner Steel – Bernard style – 300A to 400A- 4.8 Meter – 2.0mm wire
      • ESAB Style Aluminium MIG Liner – 1.6mm – 10 Pack – 4.9 Meter
      • ESAB Style Aluminium MIG Liner – 1.6mm – 4.9 Meter
      • ESAB Style MIG Aluminium Liner – 0.9mm-1.0mm – 4.9 Meter
      • ESAB Style MIG Aluminium Liner – 0.9mm-1.0mm – 4.9 Meter – 10 Pack
    • Miscellaneous MIG Equipment
      • Y2M-4TKF 4 Pin Female Circular Connector Panel Socket plug Spool gun
    • Nozzles
      • 2 x MB15 Gasless MIG Welding Nozzle UNIMIG flux core PGN15GLN
      • 40x ESAB Style PSF 160 MIG Nozzle Insulator – 40 Pack
      • 40x ESAB Style PSF 315 MIG Gas Nozzle / Shroud – 40 Pack
      • 40x MIG Nozzle Insulator – PSF 250 – ESAB Style – 40 Pack
      • 40x TWECO #2 Style MIG Gas Nozzle / Shroud 13mm – 40 Pack
      • 40x TWECO #2 Style MIG Gas Nozzle / Shroud 16mm – 40 Pack
      • 5 x MB15 Gasless MIG Welding Nozzle UNIMIG flux core PGN15GLN
      • ESAB Style PSF 400 MIG Nozzle Insulator – 40 Pack
      • ESAB Style PSF 400 MIG Nozzle Insulator – 5 Pack
      • TWECO #2 Style Fixed Nozzle / Shroud 31 Piece Value Kit / Combo 0.9mm Tips
    • O-Rings
      • Bernard MIG Gas Diffuser O-Rings for 4435 / 4635 – 6 Pack Pyrex TIG
      • Bernard Style O-Rings for 4235 / 4335 MIG Gas Diffuser – 5 Pack – Viton O Rings
    • Rollers
      • Miller Drive Roller 1.6mm Knurled
    • Swan Necks
      • 2 x Bernard Rubber Cap insulator for 400 Amp (Silicone) for Swan Neck
      • 2 x Bernard Rubber Silicone Neck Insulator for 200/300A Bernard Torch
      • ESAB PSF 250 MIG Swan Neck / Gooseneck – 10 Pack
      • ESAB PSF 315 MIG Swan Neck / Gooseneck – 10 Pack
    • Tip Holders
      • 40x ESAB PSF 250 MIG Tip Holder / Adapter – 40 Pack
      • ESAB PSF 250 MIG Tip Holder / Adapter – 2 Pack
    • Tweco Style
      • Consumable Combo Kits
      • Contact Tips
      • Gas Diffusers
      • Gas Nozzles
      • Guns Complete
      • Insulators
      • Liners
      • Misc / Accessories
      • Swan Necks / Conductor Tubes
  • Plasma
    • 'O' Ring to Suit AT1000 Compressed Air Filter Cartridge for Plasma Cutter – Sand Blaster
    • Bossweld Plasma Gear
      • CBR50 Cut 40 Plasma Circle Cutting Guide Kit to Suit LT50 CB50
      • Cutting Tip 1304 for UNIMG VIPER CBR50 & LT50 & CB50 Plasma Torch – 5 Pack
      • Electrode for UNIMG CBR50 & Bossweld LT50 & Trafimet CB50 Torch's – 5 Pack
      • Extended Cutting Tip for VIPER CBR50 & LT50 & CB50 Plasma torch – 5 Pack
      • Extended Electrode Hafnium for VIPER CBR50 & LT50 & CB50 Plasma Torch – 5 Pack
      • Shield Cap Hand for VIPER CBR50 & LT50 & CB50 Plasma Torch – 1394S-50 – 1 Each
      • Swirl Ring SC1510 for UNIMG VIPER CBR50 & LT50 & CB50 Plasma Torch – 1 Each
    • Consumables
      • 1.0mm Contact Cutting Kit – to suit 45 Amp PT80 Plasma Cutter Drag Tip – Made in Italy
      • 1.0mm Contact Cutting Tips for SC80 Plasma Torch – 5 Pack
      • 1.2mm Contact Cutting Tips for SC80 Plasma Torch – 5 Each – Made in Italy
      • 2 x 'O' Ring to Suit AT1000 Compressed Air Filter Cartridge for Plasma Cutter – Sand Blaster
      • 2 x AT1000 Compressed Air Line Filter Replacement – 50505-48
      • 50 Pack – Shield Cap to suit the HF Pilot Arc Plasma Torch – 60 Series AG60
      • 6 x AT1000 Compressed Air Line Cartridge Filter for Plasma Cutter – Sand Blaster
      • 8 x AT1000 Compressed Air Line Filter Replacement
      • AT1000 Compressed Air Line Cartridge Filter for Plasma Cutter – Sand Blaster – Spray Paint
      • AT1000 Compressed Air Line Filter Replacement
      • Binzel Style PSB121 Plasma Torch 1.5mm Cutting Tips – 5 Pack – SB801 – 743.0142
      • Binzel Style PSB121 Plasma Torch Electrode – 5 Pack – SB801 – 743.0441
      • Cut 40 Plasma Cutter HF Electrode to Suit PCH35/M28 Plasma Torch – 5 Pack
      • Cut 40 Swirl Ring / Air Diffuser to Suit PCH35/M28 Plasma Torch
      • Cut 40 Swirl Ring / Air Diffuser to Suit PCH35/M28 Plasma Torch – 2 Pack
      • CUT45 SC80 Plasma Cutter Contact Cutting Shield Cap – 1 Each – Made in Italy
      • CUT45 SC80 Plasma Cutter Gouging Shield Cap – 1 Each – Made in Italy
      • CUT45 SC80 Plasma Cutter Gouging Tip 1.6mm – 5 Each Made in Italy
      • Electrodes
      • Gouging Shield Cap Body – to suit PT45 80 Plasma Cutter – Made in Italy
      • Nozzles
      • Plasma Cutter 30A Electrode to Suit Hypertherm Powermax 30 – 5 Pack
      • Plasma Cutter Hand Shield to Suit Hypertherm Powermax 45 – 3 Pack
      • Plasma Cutter Retaining Cap to Suit Hypertherm Powermax 45 – 1 Each
      • Plasma Cutter SC30 / LC25 Torch Consumable Kit to suit VIPER CUT30 Made in Italy
      • Plasma Cutter Swirl Ring to Suit Hypertherm Powermax 45 – 2 Pack
      • PT120 Consumables for Contact Cutting 70A Combo Kit – Made in Italy
      • PT120 Consumables for Gouging Cutting Combo Kit – Made in Italy
      • PT120 CONSUMABLES MEGA KIT to Suit 120 amp Plasma Cutter – MADE IN ITALY
      • PT80 Plasma Torch Head O Ring – 5 Each
      • Retaining Caps
      • SC120 1.0mm Consumable Kit to Suit 40-50 Amps – Small Kit – Made in Italy U14002K
      • SC120 1.2mm Consumable Kit to Suit 60-70 amps – Small Kit – Made in Italy U14002K
      • SC120 1.4mm Consumable Kit to Suit 80-90 amps – Small Kit – Made in Italy U14002K
      • SC120 1.6mm Consumable Kit to Suit 80-120 amps – Small Kit Made in Italy U14002K
      • SC120 Cooling Tube – 1 Each – Made in Italy U14002K
      • SC120 Cooling Tube – 5 Each – Made in Italy U14002K
      • SC120 Machine Torch Shield Cap – 1 Each – Made in Italy U14002K
      • SC30 Plasma Cutter Electrode – 5 Each Made in Italy
      • Standoff Guide to Suit S45 / S54 Ergocut Plasma Torch – 17mm Gap
      • Steel Vision Air diffuser / Swirl Ring to Suit S45/S30/S54 Ergocut Plasma Torch
      • Steel Vision Flat Electrode to Suit S45 Ergocut Plasma Torch – 5 Pack
      • Swirl Ring
      • Thermal Dynamics 9-8213 SL60 / SL100 Plasma Starter Cartridge – 1 Each
      • Thermal Dynamics Plasma 30 Amp Drag Tip – 10 Each 9-8206
      • Tips
      • Trifamet 1.0mm Cutting Tip to Suit S45 Steel Vision Plasma Torch – 5 Pack
      • Viper Cut 30 PT30 PT40 PT60 Plasma Cutter Standoff Guide – 2 Each
      • Viper Cut30 PT30 PT40 PT60 Plasma Torch 0.9mm Cutting Tip – 5 Each Made in Italy
      • VIPER CUT30 SC30 Plasma Cutter Retaining Cap – 2 Each Made in Italy
      • VIPER CUT30 SC30 Plasma Cutter Swirl Ring – 2 Each Made in Italy
    • Hypertherm
      • Plasma Cutter 30A Deflector to Suit Hypertherm Powermax 30 Air – 1 Pack
      • Plasma Cutter Retaining Cap to Suit Hypertherm Powermax 30 – 1 Each
      • Powermax 125
      • Powermax 45
      • Powermax 65, 85 and 105
    • Plasma Cutter Accessories & Spare Parts
      • PT-100 SC120 – Bevel Tool for Plasma Cutting Suits UNIMIG U14002K
      • SC120 Stand Off Guide Suits Razor CUT 120A Plasma Cutter – 1 Each Made in Italy U14002K
      • SC120 Stand Off Guide Suits Razor CUT 120A Plasma Cutter – 5 Each Made in Italy U14002K
      • Tecmo Plasma Cutting Magnetic Tools "Taglierino" Perfect Cut Kit
    • Torches
      • 10 x Electrode for PCH51 Plasma torches PCH-51 3XR 4XI 5XR
      • 6m PT120 Machine Plasma Torch to suit 120 Amp Plasma Cutter
    • Trafimet Style
      • Plasma Cutter 30A Tip / Nozzle to Suit Hypertherm Powermax 30 – 10 Pack
      • Trafimet Plasma Stand-Off Spring A90/A140 – 1 Each
    • Unimig
      • Cut 120 – SC120
      • Cut 30
      • Cut 45 – SC80
      • SC120 Plasma Torch Head Kit – Made in Italy
      • Shield Cap Body CBR150 Plasma – 1 Each
  • Safety
    • Disposables
      • 20 x Pairs of Ear Plugs – Disposable – Foam individual wrap
      • 3M E-A-R One Touch Earplug Dispenser
      • 3M E-A-R One Touch Earplug Dispenser + 3M™ Earplug Refill Bottle 1100-BT – 500 Pairs
      • 3M™ E-A-Rsoft™ Superfit™ Earplugs 312-1255, Uncorded, Poly Bag, Large – 200 Pairs
      • 3M™ E-A-R™ Classic Uncorded Ear Plugs – 200 Pack
      • 3M™ E-A-R™ Classic™ One Touch™ Refill 391-1001 Class 4 Ear Plug – 500 Pairs
      • 3M™ E-A-R™ TaperFit™ 2 Regular Uncorded Earplugs – 200 Pairs
    • Eye Protection
      • 10 x 2mm Clear Face Shield with Chin Wrap – Clear Lens Replacement
      • 10 x Mesh Face Shield for OSS Helmets – 20 Gauge Wire Mesh Screen
      • 12 x Fire Rated & High Temp Safety Goggles – Frontline – Red Clear Lens
      • 2mm Clear Face Shield with Chin Wrap – Clear Lens Replacement
      • 2mm Shade 5 Face Shield with Chin Wrap – Replacement Lens
      • 2mm Smoke Face Shield – Extra High Impact – Smoke / Dark Lens Replacement
      • 3M Lens Cleaner Anti Fog Wipes – 300 pack
      • Brow Guard
    • Hand Protection
      • 12 Pairs – Guide 3569 MIG Gauntlet Gloves – Split Grain Cowhide – Size XL
      • 12 Pairs – Guide 3569 MIG Gauntlet Gloves – Split Grain Cowhide – Size XXL
      • 12 x LARGE Rippa Grippa "Ninja" Nitrile Coated Synthetic Glove
      • 12 x MEDIUM Rippa Grippa "Ninja" Nitrile Coated Synthetic Glove
      • 12 x XL Rippa Grippa "Ninja" Nitrile Coated Synthetic Glove
      • 2 Pairs – Guide 3569 MIG Gauntlet Gloves – Split Grain Cowhide – Size Large
      • 2 Pairs – Guide 3569 MIG Gauntlet Gloves – Split Grain Cowhide – Size XL
      • 2 Pairs – Guide 3569 MIG Gauntlet Gloves – Split Grain Cowhide – Size XXL
      • Gloves
    • Head Protection
      • Dodge Bump Cap – 70mm Peak – Black – Head Protection Hard Hat
      • Flame Resistant
      • Welding Caps
    • Hearing Protection
      • 10 Pairs Washable Ear plugs – Reusable – Silicone
      • 100 Pairs Washable Ear plugs – Reusable – Silicone
      • 3M Peltor H505B Earmuffs Welding Series Class 4 – Neck Band
      • 3M Peltor Protac III Headphone Earmuffs – Standard Headset MT13H221A
      • 3M Peltor Protac III Slim Headphone Earmuffs – Headset Slim Fit
      • 3M Peltor X5A X-Series Earmuffs – Extreme Series Headband – Class 5
    • Respiratory Protection
      • 3M 2138 Filter Disc Particulate GP2/GP3 OV/AG 2000 – 1 Pair
      • 3M 2138 Filter Disc Particulate GP2/GP3 OV/AG 2000 – 10 Pairs
      • 3M 2138 Filter Disc Particulate GP2/GP3 OV/AG 2000 – 2 Pair
      • 3M 2138 Filter Disc Particulate GP2/GP3 OV/AG 2000 – 5 Pair
      • 3M 5925 Particulate Filter P2 – 1 Pair – Replacement Filters for 6000/7500/7800 Mask
      • 3M 5925 Particulate Filter P2 – 10 Pairs – Replacement Filters for 6000/7500/7800 Mask
      • 3M 6035 Particulate Filter 6035 P2/P3 – 1 Pair
      • 3M 6035 Particulate Filter 6035 P2/P3 – 10 Pair
      • 3M 6051 A1 Gas Filter Cartridge – 1 Pair
      • 3M 6051 A1 Gas Filter Cartridge – 5 Pairs
      • 3M 6059 Multi Gas Cartridge A1B1E1K1 – 1 Pair
      • 3M 6059 Multi Gas Cartridge A1B1E1K1 – 5 Pairs – UU006790362
      • 3M Aura FFP2/P2 Mask Valve Particulate Respirator 9322 – 12 Each
      • 3M Half Face Reusable Welding Respirator Mask Starter Kit 6000 Series – GP2 AT019448086
      • 3M P2 Mask Valve Particulate Respirator 8822 (10/box)
      • 3M Speedglas Adflo Spark Arrestor – 10 Pack – 836000
      • 3M Speedglas Adflo Spark Arrestor – 100 Pack – 836000
      • 3M Speedglas Adflo Spark Arrestor – 2 Pack – 836000
      • 3M Speedglas Adflo Spark Arrestor – 5 Pack – 836000
      • 3M Speedglas Adflo Spark Arrestor Replacement – 1 Each – 836000
      • 3M Speedglas Upgraded Welding Respirator Adflo PAPR System
      • 3M Versaflo A1P3 Filter TR-6310ANZ
      • 3M Versaflo Shield M-307 with Adflo Respirator
      • 3M Versaflo Shield M-307 with Adflo Respirator Heavy Duty Battery
      • 3M™ Asbestos/Dust Respirator Kit 7535, P2/P3 – Large
      • Filters
    • Sun Protection
      • Legionnaire Hat with Throat Cover – Khaki – One Size Fits All
      • Legionnaire Hat with Throat Cover – White – One Size Fits All
      • MediChill Cooling Strips to Suit Neck Tie Scarf – 10 Pack – Welders Neck Tie
    • Welding
      • Blankets
      • Clothing
      • Curtains & Screens
      • Glasses
      • Gloves – Welding
      • Goggles
      • Helmets
      • Hoods
      • Replacement Lens Auto Helmet
      • Replacement Lens Manual Helmet
      • Shields
  • Stick
    • Abrasives
      • 3M (51751) 9" 230mm x 7mm x 22.23mm Silver Rigid Grinding Disc – 10 Each
      • 3M (51751) 9" 230mm x 7mm x 22.23mm Silver Rigid Grinding Disc – 100 Each
      • 3M (51751) 9" 230mm x 7mm x 22.23mm Silver Rigid Grinding Disc – 50 Each
      • 3M 125mm 5" 769F 120 Grit Flap Disc – 10 Each – UU010034740
      • 3M 125mm 5" 769F 120 Grit Flap Disc – 100 Each – UU010034740
      • 3M 125mm 5" 769F 120 Grit Flap Disc – 200 Each – UU010034740
      • 3M 125mm 5" 769F 120 Grit Flap Disc – 50 Each – UU010034740
      • 3M 125mm 5" 769F 60 Grit Flap Disc – 10 Each – UU010034898 – 52007
      • 3M 125mm 5" 769F 60 Grit Flap Disc – 100 Each – UU010034898 – 52007
      • 3M 125mm 5" 769F 60 Grit Flap Disc – 200 Each – UU010034898 – 52007
      • 3M 125mm 5" 769F 60 Grit Flap Disc – 50 Each – UU010034898 – 52007
      • 3M 150mm x 230mm Scotch-Brite 7447 General Purpose Hand Pad – 10 Each
      • 3M 150mm x 230mm Scotch-Brite 7447 General Purpose Hand Pad – 100 Each
      • 3M 150mm x 230mm Scotch-Brite 7447 General Purpose Hand Pad – 20 Each
      • 3M Cubitron II 60 Grit 20mm x 520mm 984F Cloth Belt – 16 Each
      • Backing Pad
      • COBRA 5" x 1mm Cutting Disc – 10 Pack – INOX Steel Cut-Off Wheel 125mm
      • COBRA 5" x 1mm Cutting Disc – 100 Pack – INOX Steel Cut-Off Wheel 125mm
      • COBRA 5" x 1mm Cutting Disc – 1000 Pack – INOX Steel Cut-Off Wheel 125mm
      • COBRA 5" x 1mm Cutting Disc – 250 Pack – INOX Steel Cut-Off Wheel 125mm
      • COBRA 5" x 1mm Cutting Disc – 50 Pack – INOX Steel Cut-Off Wheel 125mm
      • COBRA 5" x 1mm Cutting Disc – 500 Pack – INOX Steel Cut-Off Wheel 125mm
      • Cutting
      • File Belts
      • Flap
      • Grinding
      • Klingspor FS 966 ACT 125mm Ceramic Resin Fibre Sanding Disc Pad 5 "36 Grit – 50 Each
      • Klingspor FS 966 ACT 125mm Ceramic Resin Fibre Sanding Disc Pad 5" 36 Grit – 100 Each
      • Klingspor FS 966 ACT 125mm Ceramic Resin Fibre Sanding Disc Pad 5" 36 Grit – 25 Each
      • Klingspor FS 966 ACT 125mm Ceramic Resin Fibre Sanding Disc Pad 5" 60 Grit – 25 Each
      • Klingspor FS 966 ACT 125mm Ceramic Resin Fibre Sanding Disc Pad 5" 80 Grit – 25 Each
      • Klingspor PS 73 BWK 1200 Grit Abrasive disc 6" 150mm – 100 Each Part # 306625
      • Klingspor PS 73 BWK 800 Grit Abrasive disc 6" 150mm – 100 Each Part # 301886
      • Klingspor ST 358 A 125mm M14 Backing Pad – Nut Type – 1 Each
      • Sanding
      • Saws
    • Cables
      • 10m Welding Cable – 16mm² – 6 Gauge – Solar – Car Stereo AUSTRALIAN MADE
      • 10m Welding Cable – 25mm² – 3 Gauge – Solar Car Battery Stereo AUSTRALIAN MADE
      • 10m Welding Cable – 35mm² – 2 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 10m Welding Cable – 50mm² – 0 Gauge – Zero – Car Battery AUSTRALIAN MADE
      • 10m Welding Cable – 70mm² – 00 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 10m Welding Cable – 95mm² – 000 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 15m Welding Cable – 16mm² – 6 Gauge – Solar – Car Stereo AUSTRALIAN MADE
      • 15m Welding Cable – 25mm² – 3 Gauge – Solar Car Battery Stereo AUSTRALIAN MADE
      • 15m Welding Cable – 35mm² – 2 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 15m Welding Cable – 50mm² – 0 Gauge – Zero – Car Battery AUSTRALIAN MADE
      • 15m Welding Cable – 70mm² – 00 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 15m Welding Cable – 95mm² – 000 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 1m Welding Cable – 120mm² – Flexible – Solar – Car Battery AUSTRALIAN MADE
      • 1m Welding Cable – 150mm² – Flexible – Solar – Car Battery AUSTRALIAN MADE
      • 1m Welding Cable – 16mm² – 6 Gauge – Solar – Car Stereo AUSTRALIAN MADE
      • 1m Welding Cable – 25mm² – 3 Gauge – Solar Car Battery Stereo AUSTRALIAN MADE
      • 1m Welding Cable – 35mm² – 2 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 1m Welding Cable – 50mm² – 0 Gauge – Zero – Car Battery AUSTRALIAN MADE
      • 1m Welding Cable – 70mm² – 00 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 1m Welding Cable – 95mm² – 000 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 20m Welding Cable – 16mm² – 6 Gauge – Solar – Car Stereo AUSTRALIAN MADE
      • 20m Welding Cable – 25mm² – 3 Gauge – Solar Car Battery Stereo AUSTRALIAN MADE
      • 20m Welding Cable – 35mm² – 2 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 20m Welding Cable – 50mm² – 0 Gauge – Zero – Car Battery AUSTRALIAN MADE
      • 20m Welding Cable – 70mm² – 00 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 20m Welding Cable – 95mm² – 000 Gauge – Solar – Car Battery
      • 2m Welding Cable – 120mm² – Flexible – Solar – Car Battery AUSTRALIAN MADE
      • 2m Welding Cable – 16mm² – 6 Gauge – Solar – Car Stereo AUSTRALIAN MADE
      • 2m Welding Cable – 25mm² – 3 Gauge – Solar Car Battery Stereo AUSTRALIAN MADE
      • 2m Welding Cable – 35mm² – 2 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 2m Welding Cable – 50mm² – 0 Gauge – Zero – Car Battery AUSTRALIAN MADE
      • 2m Welding Cable – 70mm² – 00 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 2m Welding Cable – 95mm² – 000 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 40m Welding Cable – 16mm² – 6 Gauge – Solar – Car Stereo AUSTRALIAN MADE
      • 40m Welding Cable – 25mm² – 3 Gauge – Solar Car Battery Stereo AUSTRALIAN MADE
      • 40m Welding Cable – 35mm² – 2 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 40m Welding Cable – 50mm² – 0 Gauge – Zero – Car Battery AUSTRALIAN MADE
      • 40m Welding Cable – 70mm² – 00 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 40m Welding Cable – 95mm² – 000 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 5m Welding Cable – 35mm² – 2 Gauge – Solar – Car Battery AUSTRALIAN MADE
      • 5m Welding Cable – 50mm² – 0 Gauge – Zero – Car Battery AUSTRALIAN MADE
      • Connectors
      • Lugs
      • Plugs
      • Sockets
    • Clamps
      • 200A Earth Clamp and Lead – 10 Meter – 10-25 Small Plug
      • 200A Earth Clamp and Lead – 16 Meter – 10-25 Small Plug
      • 200A Earth Clamp and Lead – 16 Meter – 35-50 Large Plug
      • 200A Earth Clamp and Lead – 3 Meter – 10-25 Small Plug
      • 200A Earth Clamp and Lead – 3 Meter – 35-50 Large plug
      • 200A Earth Clamp and Lead – 5 Meter – 10-25 Small Plug
      • 200A Earth Clamp and Lead – 5 Meter – 35-50 Large Plug
      • 200A Magnetic Earth Clamp and Lead – 16 Meter – 10-25 Small Plug
      • 240A Earth Clamp and Lead HD – 5 Meter – 10-25 Small Plug
      • 330A Earth Clamp and Lead – 16 Meter – 35-50 Large Plug
      • 330A Earth Clamp and Lead – 3 Meter – 35-50 Large Plug
      • 330A Earth Clamp and Lead – 4 Meter – 35-50 Large Plug
      • 330A Earth Clamp and Lead – 5 Meter – 35-50 Large Plug
      • 400A Earth Clamp and Lead – 5 Meter – 35-50 Large Plug
      • 500 Amp Jumper Lead Booster Clamp – Black
      • 500 Amp Jumper Lead Booster Clamp – Red
      • 500 Amp Jumper Lead Booster Clamps – Quad Pack
      • 500 Amp Jumper Lead Booster Clamps – Twin Pack
      • C Type
      • Earth
      • Square
      • Welding Magnetic Earth Clamp – 500Amp
    • Electrode Holders
      • 200A Arc Lead Welding Set – 3 Meter – 10-25 Small Plug
      • 200A Arc Lead Welding Set – 6 Meter – 10-25 Small Plug
      • 200A Electrode Holder and Lead – 10 Meter – 10-25 Small Plug
      • 200A Electrode Holder and Lead – 10 Meter – 35-50 Large Plug
      • 200A Electrode Holder and Lead – 3 Meter – 10-25 Small Plug
      • 200A Electrode Holder and Lead – 3 Meter – 35-50 Large Plug
      • 200A Electrode Holder and Lead – 5 Meter – 10-25 Small Plug
      • 200A Electrode Holder and Lead – 5 Meter – 35-50 Large Plug
      • 200A Welding Electrode Holder and Earth Lead Combo – 10 Meter – 10-25 Small Plug
      • 240A Arc Lead Welding Set – 10 Meter – 35-50 Large Plug
      • 240A Arc Lead Welding Set – 3 Meter – 35-50 Large Plug
      • 240A Arc Lead Welding Set – 4 Meter – 35-50 Large Plug
      • 240A Arc Lead Welding Set – 6 Meter – 35-50 Large Plug
      • 240A Electrode Holder and Lead – 5 Meter – 35-50 Large Plug
      • 330A Arc Lead Welding Set – 6 Meter – 35-50 Large Plug
      • 330A Electrode Holder and Lead – 3 Meter – 35-50 Large Plug
      • 400A Electrode Holder And Lead – 5 Meter – 35-50 Large plug
    • Position Holders
      • 2 x Strong Hand Locking C-Clamp Pliers 165mm Long with Round Ends
      • 2 x Strong Hand Locking C-Clamp Pliers 165mm Long with Swivel Pad Ends
      • 2 x Strong Hand Locking C-Clamp Pliers 280mm Long with Round Ends
      • 2 x Strong Hand Locking C-Clamp Pliers 280mm Long with Swivel Pad Ends
      • 2 x Strong Hand Locking Sheet Metal Pliers 250mm Long with 76mm Jaw
      • 2x Strong Hand Utility Clamp – Light Duty G-Rail – 520mm x 180mm
      • 5 x Strong Hand Locking C-Clamp Pliers 165mm Long with Round Ends
      • 5 x Strong Hand Locking C-Clamp Pliers 165mm Long with Swivel Pad Ends
      • 5 x Strong Hand Locking C-Clamp Pliers 280mm Long with Round Ends
      • 5 x Strong Hand Locking C-Clamp Pliers 280mm Long with Swivel Pad Ends
      • 5 x Strong Hand Locking Sheet Metal Pliers 250mm Long with 76mm Jaw
      • 5x Strong Hand Utility Clamp – Light Duty G-Rail – 520mm x 180mm
    • Wire Brushes
      • 10x Klingspor BRS 600 W Wheel Brush with Shaft, Crimped Wire for Steel
      • 3M 115mm (4.5") 36 Grit Scotch-Brite Radial Bristle Disc Cup Brush – 33054
      • 3M 115mm (4.5") 80 Grit Scotch-Brite Radial Bristle Disc Cup Brush
      • 5x Klingspor BRS 600 W Wheel Brush with Shaft, Crimped Wire for Steel
      • 65mm Klingspor Stainless Steel Twist Knot Cup Brush for 5" Angle Grinder 12500 RPM BT 600 Z – 1 Each
      • 65mm Klingspor Stainless Steel Twist Knot Cup Brush for 5" Angle Grinder 12500 RPM BT 600 Z – 5 Each
      • 65mm Klingspor Twist Knot Cup Brush for 5" Angle Grinder 12500 RPM BT 600 Z – 1 Each
      • 65mm Klingspor Twist Knot Cup Brush for Angle Grinder 12500 RPM BT 600 Z – 5 Each
      • Klingspor 125mm x 14mm x 22.23mm Twist Knot Mild Steel Wheel Brush – 1 Each
      • Klingspor 125mm x 14mm x 22.23mm Twist Knot Mild Steel Wheel Brush – 10 Each
      • Klingspor 125mm x 14mm x 22.23mm Twist Knot Mild Steel Wheel Brush – 2 Each
      • Klingspor 125mm x 14mm x 22.23mm Twist Knot Mild Steel Wheel Brush – 5 Each
      • Klingspor 125mm x 6mm x 22.23mm Pipeline Mild Steel Wheel Brush – 1 Each
      • Klingspor 125mm x 6mm x 22.23mm Pipeline Mild Steel Wheel Brush – 10 Each
      • Klingspor 125mm x 6mm x 22.23mm Pipeline Mild Steel Wheel Brush – 2 Each
      • Klingspor 125mm x 6mm x 22.23mm Pipeline Mild Steel Wheel Brush – 5 Each
      • Klingspor 125mm x 6mm x 22.23mm Pipeline Stainless Steel Wheel Brush – 1 Each
      • Klingspor 125mm x 6mm x 22.23mm Pipeline Stainless Steel Wheel Brush – 10 Each
      • Klingspor 125mm x 6mm x 22.23mm Pipeline Stainless Steel Wheel Brush – 2 Each
      • Klingspor 125mm x 6mm x 22.23mm Pipeline Stainless Steel Wheel Brush – 5 Each
      • Twist Knot Cup Brush 120mm M14x2 – Mild Steel – Suits 7" and 9" Grinder – 1 Each
  • STICK / MMAW / ARC
    • Carbon Gouging Torch and Rods
      • DC Gouging Carbons – 5mm x 50 pack – Carbon Arc – Air Arc Rods
      • DC Gouging Carbons – 6.5mm x 50 pack – Carbon Arc – Air Arc Rods
      • MWK4000 Gouging Torch Spare Part – #18 Bottom Insulator Boot for Gouging Torch
      • MWK4000 Gouging Torch Spare Part #1 – Clamp Insulator Top / Bottom
      • MWK4000 Gouging Torch Spare Part #3 – Handle Lever for Gouging Torch
    • Electrode Holders
      • 200 Amp Arc / Stick Twist Lock Electrode Holder
      • 400 Amp Arc / Stick Twist Lock Electrode Holder – 1 Each
      • 400 Amp Arc / Stick Twist Lock Electrode Holder – 10 Each
      • 400 Amp Arc / Stick Twist Lock Electrode Holder – 5 Each
    • Panel Mount Plugs
      • Amphenol 7 Pin Plug Panel Socket for UNIMIG Razor Series Machines
      • Male Panel Plug Socket 35-70mm Dinse
      • Male Panel Plug Socket 70-95mm Dinse High Style
      • Y2M-4TJ 4 Pin Male Circular Connector Panel Socket plug Military
    • Panel Mount Sockets
      • 2 x Panel Socket Welding Cable Connector 10-25 DINSE 100-200 Amp
      • 2 x Panel Socket Welding Cable Connector 35-50 DINSE 200-300 Amp
      • 2 x Panel Socket Welding Cable Connector 50-70 DINSE 300-400 Amp
      • 2 x Panel Socket Welding Cable Connector 70-95 DINSE 400-500 Amp
      • Male Panel Plug Socket 70-95mm Dinse
      • Panel Socket & Cable Plug Connector 10-25 DINSE 100-200 Amp
      • Panel Socket & Cable Plug Connector 35-50 DINSE 200-300 Amp
      • Panel Socket & Cable Plug Connector 50-70 DINSE 300-400 Amp
      • Panel Socket & Cable Plug Connector 70-95 DINSE 400-500 Amp
      • Panel Socket Welding Cable Connector 10-25 DINSE 100-200 Amp
      • Panel Socket Welding Cable Connector 35-50 DINSE 200-300 Amp
      • Panel Socket Welding Cable Connector 50-70 DINSE 300-400 Amp
      • Panel Socket Welding Cable Connector 70-95 DINSE 400-500 Amp
  • TIG
    • 3 Piece TIG gear
      • 10x 26 Series TIG Large Torch Body (Valve) 150 – 200 Amp
      • 10x 26 Series TIG Large Torch Body 150 – 200 Amp – Three Piece Torch
      • 10x 9 Series TIG Small Torch Body (Valve) 130 Amp – 3 Piece
      • 10x WP9 Series TIG Torch Small Torch Body Three Piece 130 Amp
      • 17 / 18 / 26 Series TIG Large Torch Plain / Knurled Handle 150 – 200 Amp
      • 17 / 18 / 26 Series TIG Large Torch Ribbed Handle 150 – 200 Amp
      • 26 Series TIG Large Coil Element 150 – 200 Amp – Three Piece Torch
      • 26 Series TIG Large Torch Body (Valve) 150 – 200 Amp
      • 26 Series TIG Large Torch Body 150 – 200 Amp – Three Piece Torch
      • 3 Piece 26 Series TIG Large Torch Head 150 – 200 Amp 110 Degree – 1 Each
      • 3 Piece 26 Series TIG Large Torch Head 150 – 200 Amp 110 Degree – 10 Each
      • 3 Piece 26 Series TIG Large Torch Head 150 – 200 Amp 90 Degree – 1 Each
      • 3 Piece 26 Series TIG Large Torch Head 150 – 200 Amp 90 Degree – 10 Each
      • 3 Piece 9 Series TIG Small Torch Head 130 Amp 90 degree
      • 3 Piece TIG WP17 / 18 / 26 Series 27 Piece Combo Three Piece
      • 3 Piece TIG WP17 / 18 / 26 Series Combo Three Piece
      • 3 Piece TIG WP9 / WP20 Series Complete Combo Three Piece
      • 3 Piece TIG WP9 series 27 Piece Ultimate Combo Three Piece
      • 9 / 20 Series TIG Small Torch Knurled Handle 130 Amp – 3 Piece Handle
      • 9 / 20 Series TIG Small Torch Ribbed Handle 130 Amp – 3 Piece Handle
      • 9 Series TIG Small Torch Body (Valve) 130 Amp – 3 Piece
      • Large Snap-On TIG Switch Housing / Handle Plastic Suits 18/26
      • Small Snap-On TIG Switch Housing / Handle Plastic Suits 9/17/20
    • Accessory Kits
      • 1.0mm TIG Gas Lens Collet Body SUPER STUBBY KIT – WP17|18|26
      • 1.0mm TIG Gas Lens Saver Collet Body 12 Piece Kit WP9 | 20
      • 1.0mm TIG Standard Collet Body Kit – WP9 | 20
      • 1.6mm TIG Gas Lens Collet Body STUBBY KIT SUIT CK WP17|18|26
      • 1.6mm TIG Gas Lens Collet Body STUBBY KIT SUIT WP17|18|26
      • 1.6mm TIG Gas Lens Collet Body SUPER STUBBY KIT – WP17|18|26
      • 1.6mm TIG Gas Lens Saver Collet Body 12 Piece Kit WP9 | 20
      • 2.4mm TIG Gas Lens Collet Body STUBBY KIT to suit CK WP17|18|26
      • 2.4mm TIG Gas Lens Collet Body STUBBY KIT WP17|18|26
      • 2.4mm TIG Gas Lens Collet Body SUPER STUBBY KIT – WP17|18|26
      • 2.4mm TIG Gas Lens Saver Collet Body 12 Piece Kit WP9 | 20
      • 2.4mm TIG Standard Collet Body Kit – WP9 | 20
      • 240V 9 Litre Water Cooler with 4m Kemppi TIG Torch 250A MasterTIG Package Deal
      • 240V 9 Litre Water Cooler with 8m Kemppi TIG Torch 250A MasterTIG Package Deal
      • 3.2mm TIG Gas Lens Collet Body STUBBY KIT WP17|18|26
      • 3.2mm TIG Gas Lens Collet Body SUPER STUBBY KIT – WP17|18|26
      • 3.2mm TIG Gas Lens Saver Collet Body 12 Piece Kit WP9 | 20
      • 3.2mm TIG Standard Collet Body Kit – WP9 | 20
      • 50 Piece BIG TIG Gas Lens Combo – WP17|18|26 – Variety Pack
      • 50 Piece BIG TIG Gas Lens Combo – WP9 | 20 – Variety Pack
      • AC/DC TIG Welding Starter Pack ACDC TIG
      • AC/DC TIG Welding Starter Pack ACDC to Suit T2 TIG Torch
      • FURICK CUP Fupa #12 1/16 in. – 1.6mm Diffuser Install Kit
      • Furick Starter Kit for 9/20 TIG Torches – FU920-SK
      • TICON Silicon Purge Plugs – TIG Aesthetics FULL KIT – Manifold | Header | Exhaust
      • TICON Silicon Purge Plugs EXHAUST KIT 2.5″-4″
      • TICON Silicon Purge Plugs HEADER KIT 1.5″-2″
      • TICON Silicon Purge Plugs Turbo Manifold KIT 1.25″-2″
      • Tig Aesthetics Silicone Trailing Shield for TIG Torches
      • TIG Gas Lens Saver Collet Body 12 Piece Kit – 1.0mm – CK17|18|26
      • TIG Gas Lens Saver Collet Body 12 Piece Kit – 1.0mm – WP17|18|26
      • TIG Gas Lens Saver Collet Body 12 Piece Kit – 1.6mm  – WP17|18|26
      • TIG Gas Lens Saver Collet Body 12 Piece Kit – 1.6mm – CK17|18|26
      • TIG Gas Lens Saver Collet Body 12 Piece Kit – 2.4mm – CK17|18|26
      • TIG Gas Lens Saver Collet Body 12 Piece Kit – 2.4mm – WP17|18|26
      • TIG Gas Lens Saver Collet Body 12 Piece Kit – 3.2mm – CK17|18|26
      • TIG Gas Lens Saver Collet Body 12 Piece Kit – 3.2mm – WP17|18|26
      • TIG Gas Lens Saver Collet Body 14 Piece Kit – 1.6mm Large Diameter – WP9 | 20
      • TIG Gas Lens Saver Collet Body 14 Piece Kit – 2.4mm Large Diameter – WP9 | 20
      • TIG Gas Lens Saver Collet Body 15 Piece Kit – 1.6mm Large Diameter – WP17|18|26
      • TIG Gas Lens Saver Collet Body 15 Piece Kit – 2.4mm Large Diameter – WP17|18|26
      • TIG Gas Lens Saver Collet Body 15 Piece Kit – 3.2mm Large Diameter – WP17|18|26
      • TIG Gas Lens Saver Collet Body 6 Piece Mini KIT – 1.6mm – WP 17|18|26
      • TIG Gas Lens Saver Collet Body 6 Piece Mini KIT – 1.6mm – WP9 | 20
      • TIG Gas Lens Saver Collet Body 6 Piece Mini KIT – 2.4mm – WP 17|18|26
      • TIG Gas Lens Saver Collet Body 6 Piece Mini KIT – 2.4mm – WP9 | 20
      • TIG Gas Lens Saver Collet Body 6 Piece Mini KIT – 3.2mm – WP 17|18|26
      • TIG Gas Lens Saver Collet Body 6 Piece Mini KIT – 3.2mm – WP9 | 20
      • TIG Gas Lens Saver Collet Body STUBBY 6 Piece Mini KIT – 1.6mm – WP 17|18|26
      • TIG Gas Lens Saver Collet Body STUBBY 6 Piece Mini KIT – 2.4mm – WP 17|18|26
      • TIG Gas Lens Saver Collet Body STUBBY 6 Piece Mini KIT – 3.2mm – WP 17|18|26
      • TIG Standard Collet Body Kit 15 Piece KIT | 1.0mm | WP 17|18|26
      • TIG Standard Collet Body Kit 15 Piece KIT | 1.6mm | WP 17|18|26
      • TIG Standard Collet Body Kit 15 Piece KIT | 2.4mm | WP 17|18|26
      • TIG Standard Collet Body Kit 15 Piece KIT | 3.2mm | WP 17|18|26
      • TIG Torch Package To Suit Cigweld Machines with 8 Pin Connector – Suits WS, TM & BV
      • TIG Torch Package To Suit UNIMIG Viper 182 & 185 and many other machines – 17V-4MCP50
    • Back Caps
      • 17 / 18 / 26 Series
      • 9 / 20 Series
    • Collet Bodies
      • 17 / 18 / 26 GAS LENS
      • 17 / 18 / 26 Standard
      • 9 / 20 Standard
    • Collets
      • 9 / 20 Series
    • Cups
      • 17 / 18 / 26 GAS LENS
      • 17 / 18 / 26 Standard
      • 9 / 20 GAS LENS
      • 9 / 20 Standard
    • Insulators
      • 2 x TIG Insulator for STUBBY Gas Lens – WP17 | 18 | 26 Series
      • 40 x TIG Insulator for STUBBY Gas Lens – WP17 | 18 | 26 Series
      • 40x TIG Insulator Gasket – WP-17 | 18 | 26 – 40 pack
      • 40x TIG Insulator LARGE DIAMETER GAS LENS – 40 Pack WP17 | 18 | 26
      • TIG Insulator GAS LENS – WP17 | 18 | 26 Series – 2 Each
      • TIG Insulator GAS LENS – WP17 | 18 | 26 Series – 40 Each
      • TIG Insulator Gasket – WP-17 | 18 | 26 – 2 pack
      • TIG Insulator Gasket – WP-17 | 18 | 26 – 5 pack
      • TIG Insulator LARGE DIAMETER GAS LENS – 2 Pack WP17 | 18 | 26
      • TIG Insulator LARGE DIAMETER GAS LENS – 2 Pack WP9 | 20
      • TIG Insulator LARGE DIAMETER GAS LENS – 40 Pack WP9 | 20
      • TIG Insulator Rear Head – WP17 / 18 / 26 Series – 2 Each
      • TIG Insulator Rear Head – WP17 / 18 / 26 Series – 40 Each
      • TIG Insulator Rear Head – WP9 | 20 Series – 2 Each
      • TIG Insulator Rear Head – WP9 | 20 Series – 40 Each
      • TIG Insulator Rear Head – WP9 | 20 Series – 5 Each
      • TIG Insulator standard gasket- WP17 / 18 / 26 Series – 2 Each
      • TIG Insulator standard gasket- WP17 / 18 / 26 Series – 40 Each
    • Pyrex / Glass TIG Cups
      • BBW Titanium Cover Only to suit BBWSG-19 Cup
      • BBWSG-16 Replacement Glass BBWSGG
      • FURICK CUP Fupa #12 Diffusers 1/16in. – 1.6mm – 2 Pack
      • FURICK CUP Fupa #12 Diffusers 3/32in. – 2.4mm – 3 Pack
      • WP17 / 18 / 26
      • WP9 / 20
    • Pyrex Cups
      • 2 Pack of Mesh Filter's for BBW Pyrex Cup to Suit WP9/20 Torch FUPA
      • BBW Pyrex Glass TIG Cup Kit 1.6mm WP17/26 – FUPA FURICK
      • BBW Pyrex Glass TIG Cup Kit 2.4mm WP17/26 – FUPA FURICK
    • TIG Torch Accessories
      • 10 x Power Cable ADAPTER REDUCER 5/8 UNF – 3/8 UNF To Suit TIG 9 17 26
      • 10x 3 Piece WP9 / 20 Series TIG Small Torch Head 130 Amp
      • 2 Pin adaptor for TIG Torches
      • 2 x Dinse Reducer Adapter Convert from 3550 13mm to 1025 9mm
      • 2 x Furick Standard Insulator for 17 |18 and 26 TIG Torches – NON CK
      • 240V 9 Litre Water Cooler with WP18 380 Amp 4m Water Cooled TIG Torch
      • 240V 9 Litre Water Cooler with WP18 380 Amp 8m Water Cooled TIG Torch
      • 3 Piece WP9 / 20 Series TIG Small Torch Head 130 Amp
      • 4m TIG Torch to Suit Foot Pedal TIG Welding – Super Lightweight 130 Amp Torch
      • 5/8 UNF Male Nut and Tail to suit 5mm Hose Suits Miller Maxstar , Lincoln and Cigweld
      • 7 Pin UNIMIG Female Plug to 9 Pin UNIMIG Male Plug Adapter
      • 8 Meter Water Hose Assembly (Suits 20 Series)
      • 8m TIG Torch to Suit Foot Pedal TIG Welding – Super Lightweight 130 Amp Torch
      • 9 Pin AERO Plug to Suit Bossweld 9 Pin Machines
      • Amphenol plug 7 Pin – Unimig Razor Series Machines
      • Bossweld 12 Pin Aero Plug
      • Bossweld Single Button Tig Torch Switch – 95.ATSSW
      • CIGWELD Male Plug 8 pin suit Cigweld machines CIG weld UOA706900
      • CK 01-0009 Head Adjustment Stem & O-Ring for Flex-Loc Torch Heads
      • CK 01-0009 Head Stem & O-Ring for Flex Loc Torch Heads – 2 Each
      • CK 1525PCSF 25' 8m Air Cooled Super Flex Power Cable to suit CK26 Torches
      • CK 212PCSF 12' 4m Water Cooled Super Flex Power Cable to suit CK20 and FL230
      • CK 225PCSF 25' 8m Water Cooled Super Flex Power Cable to suit CK20 and FL230
      • CK 3 Series Torch Medium Handle for CK17, CK150 Torches
      • CK 325PCSF 8m 25' Super Flex Power Cable to suit CK18
      • CK Dinse 35 Gas Cooled Safe-Loc™ Connector – Suits CK9 | CK17 Torches
      • CK FlexLoc TIG Torch Head – 2 Series 130A
      • CK FlexLoc TIG Torch Head – 3 Series 150A
      • CK Fronius Gas Cooled Safe-Loc Connector – Suits CK26 | TL26
      • CK Fronius Gas Cooled Safe-Loc™ Connector – Suits CK9 | CK17 | MR70
      • CK Fronius Water Cooled Safe-Loc Connector – Suits CK18 | CK20
      • CK Heatshield Gas Lens TIG Cup Insulator – Suits 2 Series – 1 Each
      • CK Heatshield Gas Lens TIG Cup Insulator – Suits 2 Series – 2 Pack
      • CK Heatshield Gas Lens TIG Cup Insulator – Suits 3 Series – 1 Each
      • CK Heatshield Gas Lens TIG Cup Insulator – Suits 3 Series – 2 Each
      • CK Heatshield Standard TIG Cup Insulator – Suits 3 Series – 1 Each
      • CK Heatshield Standard TIG Cup Insulator – Suits 3 Series – 2 Pack
      • CK Kemppi 1 Piece TIG Torch Water Cooled Adaptor
      • CK Stubby Heatshield Gas Lens TIG Cup Insulator – Suits 4 Series – 1 Each
      • CK Stubby Heatshield Gas Lens TIG Cup Insulator – Suits 4 Series – 2 Pack
      • CK TIG Lead Switch – Velcro 8m
      • CK TIG Torch Amptrak Linear Remote AMP Control – 10k Potentiometer
      • CK TIG Torch Remote AMP Control with Miller 14 Pin Plug – 1k Potentiometer
      • CK TIG Torch Remote AMP Control with Miller 14 Pin Plug – 1k Potentiometer – 4.2m
      • CK TIG Torch Wheel Remote AMP Control – 10k Potentiometer
      • CK Water Cooled Tig Torch Adaptor – Dinse 35
      • COBRA TIG Torch Power Lead Rubber boot to Suit Kemppi CK TIG Torches
      • Dinse Reducer Adapter Convert from 3550 13mm to 1025 9mm
      • Female 9 Pin Panel Mount Socket to Suit Unimig 9 Pin Machines
      • Fronius Male Tuchel Style Socket 8 Pol / Pin Plug with Pins
      • FURICK Cippy Thermoplastic TIG Cup Kit – 1 Each – BBWCIP – Made in USA
      • Furick JAZZY 10 – 2.4mm Mesh Screen Filter – 3 Pack
      • FURICK Moose Knuckle #14 Pyrex TIG Cup Kit – 1 Each – MK14G
      • Furick Moose Knuckle 14 – 2.4mm Mesh Screen Filter – 3 Pack
      • Furick Standard Insulator for 17 |18 and 26 TIG Torches – NON CK
      • Furick Starter Kit for 17/18/26 TIG Torches – FU17-SK
      • Genuine Crouzet Flat Button TIG Torch Control Switch 950F
      • Grey Silicone Purge Plugs (6" Tube) – TIG Aesthetics by Ticon – Pack of 2
      • Kemppi TIG Adapter 5/8 UNF Female to 1/4 BSP Female
      • Left Hand 5/8 Water Nut Brass Nut – 1 Each
      • Male Amphenol Style Plug 10 Pol / Pin – Suits Kemppi Mastertig ACDC 2000
      • Male Amphenol Style Plug 2 Pol / Pin To Suit Miller
      • Male Tuchel Flat Style Socket 5 Pol / Pin To Suit Lincoln V160
      • Male Tuchel Socket plug 14 Pol Pin To Suit Miller Maxstar 200
      • Male Tuchel Style Socket 9 Pol / Pin To Suit Fronius Plug
      • PCA2-3 Adaptor Rubber Boot Only To Suit Kemppi CK TIG Torches
      • Plasma Machine Torch Plug to suit Razor Cut 45 and Cut 80 CNC port
      • Power Cable Adapter 45V11 Tig Welding Torch Water-Cooled WP-18 WP-20
      • Power Cable ADAPTER REDUCER 5/8 UNF – 3/8 UNF To Suit TIG 9 17 26
      • Purple Silicone Purge Plugs (4.5" Pipe / 5" Tube) – TIG Aesthetics by Ticon – Pack of 2
      • Right Hand 5/8 Water Nut Brass Nut – 1 Each
      • Stainless Steel Mesh Filter Ring Insert for BBW Pyrex TIG Cup – WP9/20 – FURICK Style
      • Stainless Steel Ring Insert for BBW Pyrex TIG Cup – WP9/20 – FURICK Style
      • Switch Lead 2 wires for TIG Torches with Push Button – 4 Meter
      • Switch Lead 2 wires for TIG Torches with Push Button – 8 Meter
      • Switch lead 5 wires for TIG torches – 4 Meter
      • Switch lead 5 wires for TIG torches – 8 Meter
      • TIG 1pc Power Cable 7.6m – 9 | 17 Series
      • TIG 1pc Power Cable 7.6m – 9 | 17 Series Soft Braided Hose – FEMALE CONNECT
      • TIG Female Amphenol Style Socket 14 Pol / Pin
      • TIG Male Amphenol Style Plug 2 Pol / Pin
      • TIG Male Amphenol Style Plug 4 Pol / Pin
      • TIG MIG Welding Water Cooler – 240V Single Phase 9 Litre
      • TIG Power 1pc Power Cable 3.8m – 9 | 17 Series
      • TIG Torch 1pc Power Cable 3.8m 26 Series
      • TIG Torch 1pc Power Cable 7.6m 26 Series – AJ03085
      • TIG Torch Amp Control Latching Switch Kit – 10K Potentiometer
      • TIG Torch Amp Control Switch Kit – 10K Potentiometer
      • TIG Torch Amp Control Switch Kit – 1K Potentiometer
      • TIG Torch Amp Control Switch Kit – 25K Potentiometer
      • TIG Torch Amp Control Switch Kit – 5K Potentiometer
      • TIG Torch Button Control Switch
    • Torch Bodies
      • 10x TIG Torch Body / Head – 24 Series – Air cooled – Parweld Premium Quality
      • 17 / 18 / 26 Series
      • 9 / 20 Series
      • CK 2 Series Torch Small Handle for CK9 CK20 & FlexLoc Torches
      • CK FlexLoc TIG Torch Body with Handle – Gas Cooled FLTBA
    • Torches
      • 17 Series 170A
      • 18 Series 350A
      • 20 Series 250A
      • 26 Series 200A
      • 4m WP17 with Valve TIG Torch to Suit Cigweld Machines with 8 Pin Connector – Suits WS, TM & BV
      • 9 Series – 130A
      • CK AK-MR TIG Accessory Kit, Micro TIG Torch Series
      • CK MR70 4m 70A Super Flex Micro TIG Torch – MR712SF
      • CK MR70 8m 70A Super Flex Micro TIG Torch – MR725SF
      • COBRA TIG Torch for MST 185 4 Meter Button Torch
    • Tungstens
      • 1.6mm PURE TIG 100% Tungsten Electrodes 10 Each – Green Tip
      • Ceriated
      • CK Sharp X Tungsten Electrode Grinder
      • Lanthanated
      • Multi Mix
      • Thoriated
      • Turbo Sharp X Grinder Head .040”-1/8” – 1.0mm to 3.2mm
      • Zirconiated
    • Unimig T2/T3W
      • 4m Unimig ARC TORCHOLOGY Air Cooled T2 TIG Torch
      • T2 / T3W Gas Lens Collet Body 1.0mm
      • T2 / T3W Gas Lens Collet Body 1.6mm
      • T2 / T3W Gas Lens Collet Body 2.4mm
      • T2 / T3W Gas Lens Collet Body 3.2mm
      • T2 / T3W Head Gasket T2GS – 1 Each
      • T2 / T3W Heat Isolator T2SN
      • T2 / T3W Long Back Cap T2LBC
      • T2 / T3W Long Back Cap T2LBC – 5 Pack
      • T2 / T3W Short Back Cap – T2SBC – 5 Pack
      • T2 / T3W Short Back Cap T2SBC
      • T2 / T3W Standard Collet Body 1.0mm
      • T2 / T3W Standard Collet Body 1.6mm
      • T2 / T3W Standard Collet Body 2.4mm
      • T2 / T3W Standard Collet Body 3.2mm
      • T2 / T3W TIG Ceramic Cup Size 10 T2CC10 – 16mm
      • T2 / T3W TIG Ceramic Cup Size 10 T2CC10 – 2 Pack
      • T2 / T3W TIG Ceramic Cup Size 10 T2CC10- 5 Pack
      • T2 / T3W TIG Ceramic Cup Size 4 – 6mm T2CC04 – 2 Pack
      • T2 / T3W TIG Ceramic Cup Size 4 – 6mm T2CC04 – 5 Pack
      • T2 / T3W TIG Ceramic Cup Size 4 T2CC04 – 6mm
      • T2 / T3W TIG Ceramic Cup Size 5 – 8mm T2CC05 – 2 Pack
      • T2 / T3W TIG Ceramic Cup Size 5 – 8mm T2CC05 – 5 Pack
      • T2 / T3W TIG Ceramic Cup Size 5 T2CC05- 8mm
      • T2 / T3W TIG Ceramic Cup Size 6 – 10mm T2CC06 – 2 Pack
      • T2 / T3W TIG Ceramic Cup Size 6 – 10mm T2CC06 – 5 Pack
      • T2 / T3W TIG Ceramic Cup Size 6 T2C06 – 10mm
      • T2 / T3W TIG Ceramic Cup Size 7 – 11mm T2CC07 – 5 Pack
      • T2 / T3W TIG Ceramic Cup Size 7 T2CC07 – 11mm
      • T2 / T3W TIG Ceramic Cup Size 7 T2CC07 – 11mm – 2 Pack
      • T2 / T3W TIG Ceramic Cup Size 8 – 12.5mm T2CC08 – 2 Pack
      • T2 / T3W TIG Ceramic Cup Size 8 – 12.5mm T2CC08 – 5 Pack
      • T2 / T3W TIG Ceramic Cup Size 8 T2CC08 – 12.5mm
    • Unimig T3
      • T3 Gas Lens Collet Body 1.6mm
      • T3 Gas Lens Collet Body 2.4mm
      • T3 Gas Lens Collet Body 3.2mm
      • T3 Head Gasket T3GS
      • T3 Heat Isolator T3SN
      • T3 Long Back Cap T3LBC
      • T3 Short Back Cap T3SBC
      • T3 Standard Collet Body 1.6mm
      • T3 Standard Collet Body 2.4mm
      • T3 Standard Collet Body 3.2mm
      • T3 TIG Torch Ceramic Cup Size 10 16mm – 5 Pack T3CC10
      • T3 TIG Torch Ceramic Cup Size 10 16mm T3CC10 – 2 Pack
      • T3 TIG Torch Ceramic Cup Size 4 6mm T3CC04 – 2 Pack
      • T3 TIG Torch Ceramic Cup Size 4 6mm T3CC04 – 5 Pack
      • T3 TIG Torch Ceramic Cup Size 5 8mm – T3CC05 – 2 Pack
      • T3 TIG Torch Ceramic Cup Size 5 8mm T3CC05 – 5 Pack
      • T3 TIG Torch Ceramic Cup Size 6 10mm T3CC06 – 2 Pack
      • T3 TIG Torch Ceramic Cup Size 6 10mm T3CC06 – 5 Pack
      • T3 TIG Torch Ceramic Cup Size 8 12.5mm T3CC08 – 2 Pack
      • T3 TIG Torch Ceramic Cup Size 8 12.5mm T3CC08 – 5 Pack
    • Wedge Collets
      • 17 / 18 / 26 Series
      • 9 / 20 Series
    • Zipper Covers
      • 3.5m Leather Welding Cable Cover / Sheath – 10cm Wide
      • 3m CK Leather Cable Cover for CK9, 17 and 20 TIG Torches
      • 4.5m Leather Welding Cable Cover / Sheath – 10cm Wide
      • 4m Cable Cover Cowboy Zipper Jacket – TIG Welding & Plasma Cutting Torch
      • 7.5m Leather Welding Cable Cover / Sheath – 10cm Wide
      • 7.5m Leather Welding Cable Cover / Sheath – 15cm Wide
      • 7m CK Leather Cable Cover for CK9, 17 and 20 TIG Torches
      • 8m Cable Cover Cowboy Zipper Jacket – TIG Welding & Plasma Cutting Torch
  • Tools
    • Drilling
      • 1.5mm Bright HSS Jobber Drill Bit – 10 Each
      • 1/8 Bright Double Ended Panel Drill 10 Each
      • 10.00mm Bright HSS Jobber Drill Bit – 3 Each
      • 10.50mm Bright HSS Jobber Drill Bit – 3 Each
      • 11.00mm Bright HSS Jobber Drill Bit – 3 Each
      • 11.50mm Bright HSS Jobber Drill Bit – 3 Each
      • 12.00mm Bright HSS Jobber Drill Bit – 3 Each
      • 12.50mm Bright HSS Jobber Drill Bit – 3 Each
      • 13.00mm Bright HSS Jobber Drill Bit – 3 Each
      • 14.0mm 1/2" Reduced Shank Drill Bit – 1 Each
      • 2.0mm Bright HSS Jobber Drill Bit – 10 Each
      • 2.5mm Bright HSS Jobber Drill Bit – 10 Each
      • 3.0mm Bright HSS Jobber Drill Bit – 10 Each
      • 3.5mm Bright HSS Jobber Drill Bit – 10 Each
      • 4.0mm Bright HSS Jobber Drill Bit – 10 Each
      • 4.5mm Bright HSS Jobber Drill Bit – 5 Each
      • 5.0mm Bright HSS Jobber Drill Bit – 5 Each
      • 5.5mm Bright HSS Jobber Drill Bit – 5 Each
      • 6.0mm Bright HSS Jobber Drill Bit – 5 Each
      • 6.5mm Bright HSS Jobber Drill Bit – 5 Each
      • 7.0mm Bright HSS Jobber Drill Bit – 5 Each
      • 7.5mm Bright HSS Jobber Drill Bit – 5 Each
      • 8.0mm Bright HSS Jobber Drill Bit – 5 Each
      • 8.5mm Bright HSS Jobber Drill Bit – 5 Each
      • 9.0mm Bright HSS Jobber Drill Bit – 5 Each
      • 9.5mm Bright HSS Jobber Drill Bit – 5 Each
      • Metal Drilling
    • Welding Tools
      • Clamps & Vices
      • Clean Up
      • COBRA WDBWJ-2 300kg Welding Turntable Rotator with WP400 Chuck
      • Electrode Oven
      • Hand Tools
      • Jumper Leads
      • Markers & Chalk
      • NDT/ Test
      • Orbital Saws
      • Pickling Gel
      • Pipe Stands
      • Pipe Wraps
      • Plumbers Manometers
      • Position Holders
      • Rod Storage Tubes
      • TIG Pen
      • Torch Stands
      • Trolleys
  • Welding Machines
    • Aluminium Conversion Kits
      • Suit UNIMIG Razor 175, Viper 182, 185, 150
      • Suit UNIMIG Razor 210, 250, 200A, 205A
    • ARC/STICK
      • Weldclass Force 135ST Stick / ARC Welder
    • Combos
      • Medium Boat Building Kit – Weldclass MIG Welder – FORCE 200MST Welder Combo
      • UNIMIG Razor 180 AMP Caddy – TIG Torch & Argon Reg Combo – U13005
      • Weldclass 200 Amp ACDC TIG Welder – FORCE 201T AC/DC Pulse – TOP SHELF COMBO – Furick – CK (WF-06172)
      • Weldclass 200 Amp ACDC TIG Welder – FORCE 201T AC/DC Pulse + Foot Control Package + Premium Trolley + Filler Wires (WF-06172)
      • Weldclass 200 Amp ACDC TIG Welder – FORCE 201T AC/DC Pulse + MEGA Combo + FREE WIRE (WF-06172)
      • Weldclass Force 135ST Stick / ARC Welder – TIG Torch & Argon Regulator Combo – WF-06169
      • Weldclass Force 135ST Stick / ARC Welder – TIG Torch ULTIMATE Combo – WF-06169
    • Foot Control / Remote Control
      • Foot Pedal Control for PATON PROTIG 200
    • Fume Extraction
      • Allclear Carbon Filter for MA100 Welding And Grinding Fume Extraction 240v – 91990120
      • Allclear F9 Cartridge Filter for MA100 Welding And Grinding Fume Extraction 240v – 91990116
      • Allclear Hepa H13 Cartridge Filter for MA100 Welding And Grinding Fume Extraction 240v – 91990118
      • Allclear MA100 Welding And Grinding Fume Extraction 240v – 91100MA1
      • Plymovent AeroGuard Welding Fume Monitor
      • TRANSLAS 250Amp Single Machine Welding Fume Extraction System
      • TRANSLAS 400Amp Single Machine Welding Fume Extraction System
    • Machine Accessories & Spare Parts
      • Everlast TIG Foot Pedal Control for 7 Pin for PowerTIG – C925-0725
    • Machine Rollers
      • Gasless Flux cored MIG Drive Roller 1.0/1.2mm Knurled 30mm x10mm x 19mm
      • Gasless Flux cored MIG Drive Roller 1.2/1.6mm Knurled 30mm x 10mm x 19mm
      • Gasless Fluxcored MIG Drive Roller 0.6/0.8mm Knurled 30mm x 10mm x 19mm
      • Gasless Fluxcored MIG Drive Roller 0.8/0.9mm Knurled 30mm x 10mm x 19mm
      • Knurled – Gasless
      • Knurled MIG Drive Gear Roller Flux Cored 1.2mm & 1.6mm 30 x 10 x 08
      • MIG Drive Roller Gear 0.6/0.8mm Knurled 30mm x 10mm x 8mm for Gasless MIG Wire
      • MIG Drive Roller Gear 0.8/0.9mm Knurled 30mm x 10mm x 8mm for Gasless MIG Wire
      • MIG Drive Roller Gear 0.8/0.9mm U Groove 30mm x 22mm x 10mm
      • MIG Drive Roller Gear 0.9/1.2mm V Groove 30mm x 10mm x 8mm
      • MIG Drive Roller Gear 1.0/1.2mm Knurled 30mm x 10mm x 8mm for Gasless MIG Wire
      • MIG Welder Drive Roller 0.6 / 0.8mm Knurled 30 x 22 x 10mm
      • MIG Welder Drive Roller 0.8 / 0.9mm Knurled 30 x 22 x 10mm 1 – Each
      • Mig Welder Drive Roller 1.0/1.2mm Knurled 30x22x10mm
      • Mig Welder Drive Roller 1.2 / 1.6mm Knurled 30x22x10mm
      • Motor and gear for WDBWJ-1. To suit Rotator100kg
      • Roller U Groove 0.9mm and 1.2mm 40mm OD and 22mm ID – For Aluminium MIG Wire
      • U Groove – Aluminium
      • V Groove – Steel
    • MIG Welders
      • 0.9mm Liner to Suit Kemppi Minarc Euro Adaptor
      • 5 Pin Male Plug to suit WIA 200i – MC105-0
      • 8m Kemppi TX 355 Water Cooled Tig Torch
      • Kemppi MinarcMig 220 Amp MIG Welding Machine
      • Kemppi MinarcMig Euro Mig Torch Adapter Kit
      • Kemppi X3 FastMig 420 Amp Synergic SWF MIG / MAG / MMA Welder
      • Lincoln to Euro Machine Connection Adaptor Universal Kit – conversion LN25
      • Male 9 Pin Plug to Suit Welding Machines and Plasma Cutters – CNC plug
      • Miller to Euro MIG Welding Torch Adaptor Conversion Universal Kit
      • Pulse
      • UNIMIG 165 VIPER Multi Synergic MIG/TIG/STICK Welder – U11006K
      • UNIMIG 390 SWF 375 Amp MIG Welder – Workshop Series – KUM390SWF
      • UNIMIG Razor 250 Compact MIG Multi-Function Welder – TIG – MMA – U11010K
      • UNIMIG RAZOR MULTI 220 MIG | TIG | STICK WELDER – U11008K
      • UNIMIG WORKSHOP 270 SWF MIG WELDER – KUM270SWF
      • Weldclass Force 395MST MIG Pulse SWF Package – 3 Phase MIG
    • Multi-Function Welders
      • Unimig ENVY 230 AC/DC 15amp Pulse TIG/STICK Welder
      • Unimig ENVY 4 in 1 MULTI 230 AC/DC Pulse MIG/TIG/STICK Welder
      • Unimig ENVY MULTI 250 AC/DC Welder Pulse MIG/TIG/STICK Welder
      • UNIMIG Razorweld 350 AMP SWF MIG / TIG / MMA Welder – KUMJR350SWF
      • UNIMIG T50 Welding Trolley
    • Plasma Cutters
      • UNIMIG Viper Inverter Cut 30 MKII Plasma Cutter – U14005K
    • Stick Welders
      • 3M Speedglas G5-01TW Replacement Auto Darkening Welding Filter Lens
      • 3M Speedglas G5-01VC Replacement Auto Darkening Welding Filter Lens
      • Kemppi Minarc Evo 140 Amp MMAW | STICK | TIG | Caddy DC Welder
      • Kemppi Minarc Evo 180 Amp MMAW | STICK | TIG | Caddy DC Welder
      • TECNA 7509 490mm x 210mm x 18mm Diameter Arm Set
      • UNIMIG Razor 180 AMP MMA Stick / TIG Caddy Welder
      • UNIMIG Razorweld 140 AMP Caddy MMA | TIG | STICK Welder
      • UNIMIG VIPER 140 AMP Caddy MMA / STICK DC TIG Inverter Welder – U31006
      • Weldclass Force 135ST Stick / ARC Welder – $1000 FREE Combo – WF-06169
      • Weldclass Force 135ST Stick / ARC Welder + Electrodes – WF-06169
    • TIG Welders
      • AC DC
      • Bossweld Foot Control 3.5 Metre Cable Suits AC/DC 200E Amp Pedal
      • Cigweld / ESAB Weldskill Foot Pedal Control – 5K pot
      • Cover Plate for Kempo Weld Display
      • Foot Control Pedal to Suit ACDC TIG 320 & 200 U12002K
      • Foot Control Pedal to Suit Lincoln Powercraft 200M, 206 & 191
      • Foot Control Pedal to Suit NEW 9 Pin plug UNIMIG RAZOR ACDC 200 – U12002K
      • Foot Control Pedal to Suit UNIMIG RAZOR ACDC 200
      • Foot Control Pedal to suit Weldclass Force 201T ACDC TIG Welder WF-06172
      • Foot Control Pedal to Suit WIA 200i ACDC – MC105-0
      • Foot Pedal Control 10 Pin for Kemppi MasterTig 235 & 335 ACDC TIG Welders P0223
      • Foot Pedal Control 7 Pin for Kemppi ACDC TIG Welders
      • Foot Pedal Control for Kemppi MasterTig 2000 ACDC TIG Welders and other Mastertig Machines
      • Kemppi 235 Amp MasterTig ACDC Water Cooled TIG Welder – MT235ACDCGMAU
      • Kemppi 335 Amp MasterTig ACDC Gas Cooled TIG Welder – MT335ACDCGAU
      • Kemppi 335 Amp MasterTig ACDC Water Cooled TIG Welder – MT335ACDCGAU
      • Kemppi FR41 Wired Foot Control to suit Minarc 223T ACDC / DC
      • Kemppi MasterTig 235 ACDC TIG Welder – Gas Cooled with MPT35X Panel
      • Kemppi Wireless Foot Control Pedal for MasterTIG 235 and 335
      • TECNA 7900 Handheld Spot Welder – Resistance Welder
      • UNIMIG ENVY Wired Foot Control Pedal U11104
      • UNIMIG Foot Control Pedal to Suit RAZOR ACDC 200
      • UNIMIG Razor Digital Pulse ACDC 200 Amp Inverter TIG Welder U12002K
      • UNIMIG Razor Digital Pulse DC 220 Amp Inverter TIG Welder U12003K
      • UNIMIG wireless Foot Control Pedal to Suit RAZOR MULTI 230
      • Welding Machine Trolley / Cart – To suit MIG | TIG Welders
      • Wired Foot Control Pedal to Suit RAZOR MULTI 230
      • Wired Foot Control Pedal to Suit RAZOR MULTI 230 – Made in USA
Login / Register
0
0 items $0.00
Menu
0 items
Browse Categories
  • MIG
  • TIG
  • Gas
  • Stick
  • Plasma
  • Home
  • About us
  • Shop
  • Blog
  • Contact us

Buying Guide

HomeArchive by Category "Buying Guide"Page 3
Local warehouse inventory shelves holding stacked boxes of welding consumables and gas cylinders
08 Jun
Buying Guide

How to Source Reliable Tobin Bronze TIG Rod Supplier for All Sizes in Australia

Posted by author-avatar author
July 10, 2026
0
Tobin Bronze TIG Rod for Sale: How to Source Bare and Flux Coated All Sizes with Reliable Australian Supplier Support Mo...
Continue reading
PT30 plasma cutting guide kit installed on Xcalibur series torch
07 Jun
Buying Guide

How to Source Reliable PT30 Cutting Guide Kits for Xcalibur Torches from Wholesale Suppliers

Posted by author-avatar author
July 10, 2026
0
How to Choose a PT30 Plasma Cutting Guide Kit for Xcalibur Cut40/60 and PT60 Torches for Bulk Suppliers Not all PT30 lab...
Continue reading
Field test of UNIMIG Razor SC80 consumables running consistent cuts on 6mm mild steel
06 Jun
Buying Guide

How to Source Reliable UNIMIG Razor SC80 Plasma Consumables Supplier for Bulk Welding

Posted by author-avatar author
July 10, 2026
0
What to Know About Sourcing Reliable UNIMIG Razor SC80 Plasma Consumables for Bulk Welding Supplies Most welders assume ...
Continue reading
Thermal Dynamics SL60 SL100 plasma consumables laid out with a roller guide component
05 Jun
Buying Guide

How to Source Reliable Thermal Dynamics SL60 SL100 Consumables from Australian Suppliers

Posted by author-avatar author
July 10, 2026
0
What to Know About Sourcing Reliable Thermal Dynamics SL60 SL100 Plasma Consumables and Roller Guide from Australian Ind...
Continue reading
A stack of labeled disposable argon CO2 oxygen combo kits next to a welding workstation in an Australian workshop
04 Jun
Buying Guide

How to Buy Wholesale Disposable Welding Gas Combo Kits for Australian Bulk Buyers

Posted by author-avatar author
July 10, 2026
0
How to Choose Disposable Welding Gas Bottle Combo Kits for Argon, CO2, and Oxygen for Bulk Australian Buyers Most bulk A...
Continue reading
A complete set of Lincoln LC105 plasma consumables laid out next to a working plasma cutter in an industrial workshop setting
01 Jun
Buying Guide

How to Choose Reliable Lincoln LC105 Plasma Consumable Kit Supplier for Australia

Posted by author-avatar author
July 10, 2026
0
How to Pick a Complete Lincoln LC105 Plasma Consumable Kit for Your Cutter with Reliable Australia Supplier Most generic...
Continue reading
Australian tradesperson testing a gas regulator on a portable welding station
01 Jun
Buying Guide

How to Source Reliable Argon Oxygen Gas Regulator Suppliers for Australian Trades

Posted by author-avatar author
July 10, 2026
0
Where to Buy Argon/Oxygen/Acetylene/CO2/LPG/Nitrogen Gas Regulators with Reliable Supply for Australian Trades Higher ga...
Continue reading
Side-by-side comparison of Grade 2 and Grade 5 titanium TIG filler rods laid next to common welding workpieces
31 May
Buying Guide

Which Titanium TIG Filler Grade: 62% of Buyers Pick Wrong, Australia Supplier Tips

Posted by author-avatar author
July 10, 2026
0
Grade 2 vs Grade 5 Titanium TIG Filler Rod: Where to Buy in Australia Most Australian welders assume higher-strength Gra...
Continue reading
Stacked C, D, E and G size argon CO2 mix gas bottles labeled for MIG welding use
31 May
Buying Guide

How China Wholesale No-Rent Argon CO2 Cuts MIG Welding Cost by 35% for Users

Posted by author-avatar author
July 10, 2026
0
Argon CO2 Mix Gas Bottle for MIG Welding: No-Rent Sizes and Pricing Most MIG welders assume long-term gas bottle rental ...
Continue reading
Warehouse shelf stacked with labeled TIG welding torch parts ready for dispatch
28 May
Buying Guide

How to Source Reliable CK Micro TIG Torch MR140 Parts From Trusted Suppliers

Posted by author-avatar author
July 10, 2026
0
How to Source Reliable CK Micro TIG Torch MR140 Heads and Parts for Welding Operations Most welders assume you must buy ...
Continue reading
  • 1
  • 2
  • 3
WIA
Weldmonger
Welding Alloys
Weldclass
WA Gases
UWELD
UNIMIG
Tricab
Translas
Taurus
Tanjant
Taipan
Strong Hand Tools
Steel Vision Tools
Stargas
SSC Controls
Speedglas
SilBRAZE
Sherwin
Shaver
SGA
Safra
Precision Tools
Paton
Parweld
On Site Safety
Omega
North
Noblefix
Maxisafe
Markal
Magmaweld
Lefon
Kobelco
Klingspor
Kemppi
Hobart
Harris
Furick
Excision Tools
Ehoma
EASYkleen
Dy-Mark
Curv-O-Mark
COBRA
CK Worldwide
Cigweld
CA Group
Bullfinch
Bromic
Bossweld
Bordo
Bohler
Blue Eagle
Blue Demon
Bandit III
Auscrown
ALLCLEAR
3M

Free Shipping.

No one rejects, dislikes.

24/7 Support.

It has survived not only.

Online Payment.

All the Lorem Ipsum on.

Fast Delivery.

Many desktop page now.

OUR STORES
    • New York
    • London SF
    • Cockfosters BP
    • Los Angeles
    • Chicago
    • Las Vegas
USEFUL LINKS
    • Privacy Policy
    • Returns
    • Terms & Conditions
    • Contact Us
    • Latest News
    • Our Sitemap
OUR STORES
    • New York
    • London SF
    • Cockfosters BP
    • Los Angeles
    • Chicago
    • Las Vegas
USEFUL LINKS
    • Privacy Policy
    • Returns
    • Terms & Conditions
    • Contact Us
    • Latest News
    • Our Sitemap
AVAILABLE ON:
app-store-button
google-play-button

Join our newsletter!

Will be used in accordance with our Privacy Policy

Payment System:

Shipping System:

Our Social Links:

Weldsuper
  • Menu
  • Categories
  • MIG
  • TIG
  • Gas
  • Stick
  • Plasma
  • Home
  • Shop
  • Blog
  • Portfolio
  • About us
  • Contact us
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
Shop
Wishlist
0 items Cart
My account