Strong Hand Fixed 90° Magnet 30° & 60° – 165mm x 110mm x 20mm

Hold stock from the outside, leaving clearance for inside welds, or hold stock from the inside for outside welds.

Features: 

2 Pack
The Inside / Outside Angle Magnets are constructed from two independent rectangular magnets for consistent, undiminished magnetic force when both sides are attached to workpieces
Use mounting holes to link two magnets together for use as fixturing elements.
Use hex hole on the magnet for breakaway leverage.
Hold and position sheet metal, round pipes, square, angled or flat stock.
Should be used for tack welding only and removed before completing weld. Avoid prolonged exposure of magnetic products to heat sources of 175ºF / 80ºC and above.
165mm x 110mm Long x 20mm Wide