CO2 Heater-230V

Features:

Carbon dioxide (CO₂) heaters are designed to prevent freeze-up and malfunctioning of cylinder regulators used for carbon dioxide gas
CO₂ heater is saved with plastic guard
The heating element is encapsulated
All heat operations at the CO₂ heater to prevent interruption to the flow of gas.
The carbon dioxide heater thermostatically controls the thermal value and prevents the heater O from going above 85 C.
Gas Type: CO2
Gas Inlet Connection: Type 30 – Australian standard Co2 cylinder connection. 
Gas Outlet Connection: Type 30 – Australian standard Co2 cylinder connection. 
Working Pressure: 230 bar
Voltage/Power /Frequency: 230 V 150 W 50Hz
Bossweld Equivalent Part # 400230

Installation:

Before starting to installation; system harmony must be controlled between gas type and required bottle pressure.
The connection seal (2) on the heater must be changed if it is damaged or lost.
The carbon dioxide heater must be mounted strictly to the pressure reducer. When heater is not used, don’t connect the electric outlet to socket.
Be sure to close the bottle valve before installing the CO₂ heater to the pressure reducer