Position Holders
2 Strong Hand Adjustable Angle Magnet 30-270¡ã 120x18mm
Product Introduction
2-pack adjustable angle magnets for welding, ideal for holding sheet metal, pipes, square/angled/flat stock. Features dual independent magnets for consistent force, mounting holes for linking, hex hole for breakaway, and includes alan key & locking pin. For tack welding only; avoid heat over 80¡ãC.
Specifications
| Angle Range | 30¡ã to 270¡ã |
| 120mm x 18mm | |
| 2 | |
| Tack Welding | |
| ¡Ü80¡ãC (175oF) |
2 x Strong Hand 90¡ã Magnet 30¡ã&60¡ã 165x110x20mm
Product Introduction
Hold and position sheet metal, round pipes, square, angled or flat stock. Use from outside for inside weld clearance or inside for outside welds. Ideal for tack welding, remove before completing weld. Avoid heat over 175oF/80oC.Specifications
| Angles | 90¡ã, 30¡ã, 60¡ã |
| Magnet Type | |
| Features | Mounting holes, hex hole for breakaway leverage |
2x Multi-Angle Magnet 30-90¡ã, 40kg Pull Force
Product Introduction
Strong Hand Multi-Angle Magnet, ideal for soldering, brazing, and welding. Holds at 30¡ã, 45¡ã, 60¡ã, and 90¡ã angles. Fully enclosed design for easy cleaning, with center hole for convenient handling. 2 pack included.Product Specifications
| Angles | 30¡ã, 45¡ã, 60¡ã, 90¡ã |
| Pull Force | 40kg (85lb) |
| Features | Fully enclosed, Center hole |
2x Strong Hand Adjustable Angle Magnet 30-270¡ã 156x20mm
Product Introduction
Strong Hand Adjustable Angle Magnet (2 Pack) for precise 30¡ã-270¡ã angle holding. Ideal for sheet metal, pipes, square/angled/flat stock. Facilitates tack welding with inside/outside grip, includes alan key and locking pin. Remove before full welding; avoid heat over 175oF/80oC.Specifications
| Adjustment Range | 30¡ã to 270¡ã |
| 156mm x 20mm | |
| 2 | |
| Magnet Type | |
| Up to 175oF / 80oC |
5 Strong Hand Multi-Angle Magnet 30-90¡ã 40kg Pull Force
Product Introduction
Strong Hand Multi-Angle Magnet with 40kg pull force, ideal for holding workpieces at 30¡ã, 45¡ã, 60¡ã, and 90¡ã during soldering, brazing, and welding. Fully enclosed design for easy cleaning, center hole for convenient handling, comes in a 5-pack.Product Parameters
| 5 Pack | |
| Angles | 30¡ã, 45¡ã, 60¡ã, 90¡ã |
| Pull Force | 40kg (85lb) |
| Features | Fully enclosed, Center hole |
| Applications | Soldering, Brazing, Welding |
5x Strong Hand Adjustable Angle Magnet 30-270¡ã 120x18mm
Product Introduction
5 Pack Strong Hand Adjustable Angle Magnets, 30¡ã to 270¡ã angle range, ideal for positioning sheet metal, pipes, square/angled/flat stock during tack welding. Features 2 independent rectangular magnets for consistent magnetic force, mounting holes for linking, hex hole for breakaway, includes alan key and locking pin.
Specifications
| Angle Range | 30¡ã to 270¡ã |
| 120mm x 18mm | |
| Magnet Type | Dual Independent Rectangular |
| Tack Welding Fixturing |
5x Strong Hand Adjustable Angle Magnet 30¡ã-270¡ã 156x20mm
Product Introduction
Strong Hand Adjustable Angle Magnet, ideal for holding and positioning sheet metal, pipes, square, angled or flat stock during tack welding. Features two independent rectangular magnets for consistent magnetic force. Includes alan key and locking pin for angle locking, with mounting holes for linking magnets. Remove before completing weld; avoid heat over 175oF/80oC.Product Parameters
| Angle Range | 30¡ã to 270¡ã |
| 156mm x 20mm | |
| Tack Welding | |
| Up to 175oF / 80oC |
5x Strong Hand Fixed 90¡ã Magnet 30¡ã&60¡ã 165x110x20mm
Product Introduction
5-pack fixed angle magnets for welding, ideal for holding and positioning sheet metal, pipes, square/angled/flat stock. Features dual independent magnets for consistent force, mounting holes for linking, and hex hole for breakaway. For tack welding only; avoid heat over 175oF/80oC.
Specifications
| 165mm x 110mm x 20mm | |
| Angle Options | 90¡ã, 30¡ã, 60¡ã |
| Magnet Type | Dual independent rectangular magnets |
| Up to 175oF / 80oC |
6x Strong Hand Corner Magnet 60¡ã&90¡ã,83x95x16mm
Product Introduction
6 x Strong Hand Corner Magnet 60¡ã & 90¡ã - 83 x 95mm x 16mm. Holds stock externally for unobstructed inside welds. Features 30lbs magnetic pull force, ideal for sheet metal, pipes, square/angled/flat stock. Use for tack welding only; remove before final weld. Avoid heat over 175oF/80oC.Specifications
| 6 Pack (3 x Twin Packs) | |
| Angles | 60¡ã & 90¡ã |
| 83mm x 95mm x 16mm | |
| Magnetic Pull | 30lbs |
COBRA B1 Pipe Welding Clamp 25-65mm Alignment Tool
Product Introduction
COBRA B1 Pipe Alignment Welding Clamp, ideal for aligning pipe to pipe, fitting, flange & T piece. Made of 4mm precision CNC cut steel with stainless steel screws to prevent contamination. Replaces TAG E-Z fit EZR2.Product Parameters
| 20-65mm (0.8"-2.5") | |
| 4mm Steel (CNC Cut) | |
| Screws | |
| Adjustment | 1 Locking T-bar + 3 Wing Screws |
Abrazadera de soldadura de alineación de tuberías COBRA B2 50-150mm
Product Introduction
COBRA B2 Pipe Alignment Welding Clamp, suitable for pipe to pipe, pipe to fitting, pipe to flange, and pipe to T piece alignment. Made of precision CNC cut 4mm Steel with stainless steel holding screws, ideal for stainless steel pipes without contamination. An excellent replacement for TAG E-Z fit pipe clamp EZR6.Product Parameters
| B2 Pipe Alignment Clamp | |
| 50-150mm Diameter (2"-6") | |
| 4mm Steel (CNC Cut) | |
| Adjustment | Singular locking T bar & three fine adjustment wing screws |
COBRA B3 Pipe Alignment Welding Clamp 127-300mm
Product Introduction
COBRA B3 Pipe Alignment Welding Clamp, ideal for aligning pipe to pipe, fitting, flange & T-piece. Made of 4mm precision CNC cut Steel with stainless steel holding screws to avoid contamination. Replaces TAG E-Z fit EZR12.Product Parameters
| 127-300mm (5"-11.8") | |
| 4mm Steel (CNC cut) | |
| Adjustment | 1 Locking T-bar & 3 Fine Adjustment Wing Screws |